Posted on Friday, June 17, 2016 at 11:39 am CDT
Collision mitigation system (CMS) is specially designed for automobiles to prevent and mitigate rear-end crashes. System used accurate data analysis algorithms which combine the input from radar and image sensors to offer enhanced safety. The system consists of camera, vision control module and electronically scanning radar, and mounted on bonnet of an automobile. Collision mitigation system has specially designed to warn driver with audible and visual alarm, if system estimates high risk of collision when equipped vehicle approaches an obstacles such as pedestrian and another vehicle among others. If drivers fails to react over the warning, the system automatically applies the brake to ensure safety.
Source: Persistence Market Research
Posted on Friday, June 17, 2016 at 11:40 am CDT
Rack ends also called as inner tie rods or axial joints is a part of rack and pinion steering gear system, which converts circular motion of the steering wheel to straight line motion at the wheels The rack ends are the connections between steering rack and the outer tie rod ends which is connected to the steering knuckles joined to the wheels. The one end of the rack end which is connected to the steering rack is inside the steering track and the end is threaded onto which the outer tie rod is mounted with a locknut. Toe adjustment is done by loosening this locknut and turning the rack end to increase or decrease the length of the rack. They have a flexible rubber cover known as boot or bellows or bellow boots. The rack ends play a pivotal role in absorbing the vibrations due to improper roads and thus stabilizes the vehicle.
Source: Persistence Market Research
Posted on Friday, June 17, 2016 at 11:25 am CDT
Electronic manufacturing and design services companies test, manufacture, distribute as well as provide return or repair services for the electronic components and assemblies for original equipment manufacturers (OEM). Electronic contract manufacturers use wide range of productive functions pertaining to component design, assembly of circuit board and hardware, product engineering, process engineering, procurement, product fulfillment, distribution as well as after-sales services. Outsourcing in electronics industry has evolved in a considerable manner during the past few years. The outsourcing providers manufacture specific products on contract basis. Through the economies of scale across contracts, the contract manufacturers can use operational expertise, cheap labor and more buying power which in turn leads to low cost of production. This shift to outsource manufacturing for maintaining low costs has been the major evolution in electronics industry. OEMs also use contract manufacturing in order to cost effectively enter into a new market. Most of the electronic manufacturing and design service providers maintain good relations with the customers which in turn is beneficial in design and pre-production process that leads to shorter new product introduction time. The electronic contract manufacturing services concentrate mainly on technologies and sub technologies such as computers, networking, consumer devices, servers and storage, telecommunications and peripherals. Based on end-use industry, electronic contract manufacturing and design services market is segmented into industrial, healthcare, automotive, enterprise and infrastructure. In automotive industry, electric vehicles are gaining significant demand, which has significantly increased the need for contract manufacturing services in the sector. Further, in healthcare industry, the demand for electronic contract manufacturers is growing for providing medical hardware as rapidly developing countries are significantly buying medical equipment and looking for enhancing healthcare infrastructure and facilities.
Source: Persistence Market Research
Posted on Friday, June 17, 2016 at 10:00 am CDT
Zion Research has published a new report titled "Service Robotics Market (Professional Service Robots And Personal Service Robots) Market For Health Care, Defense, Agriculture, Entertainment, Logistics, Aerospace, Infrastructure, Research And Development And Others Applications: Global Industry Perspective, Comprehensive Analysis And Forecast, 2014 - 2020." According to the report, global demand for service robotics market was valued at USD 6.5 billion in 2014 and is expected to generate revenue of USD 17.2 billion by end of 2020, growing at a CAGR of slightly above 17.8% between 2015 and 2020.
Source: Market Research Store
Posted on Friday, June 17, 2016 at 9:57 am CDT
Currently previewing new tools and profiles for businesses, Instagram are now making a conscious effort to ensure that businesses are able to make the most out of their services. The update which will first be available to people and businesses in the U.S, Australia and New Zealand will include the addition of a prominent "contact" button, thorough analytic tools and access to promotion tools will be made simpler so that it is easier to transform posts into adverts.
Source: Ranking Solutions Ltd
Posted on Friday, June 17, 2016 at 10:33 am CDT
Topper Industrial's new Tube Division will open July 1, 2016. Ed Brown, founder of Topper Industrial, announced that the company will launch a new division called Topper Tube. Topper Industrial will add Gravity Flow Racks and Tubular Workstations to their line of material handling products. Topper Industrial makes gravity flow racks and work stations, industrial cart, containers, delivery systems, lift and rotate systems, conveyors and racking.
Source: Topper Industrial
Posted on Friday, June 17, 2016 at 9:45 am CDT
Bacterial Disease Diagnostics Market - Global Industry Perspective, Comprehensive Analysis and Forecast, 2015 – 2021
Source: Syndicate Market Research
Posted on Friday, June 17, 2016 at 9:15 am CDT
Bispecific antibodies are one of the fastest developing markets in the field of immune response therapeutics, medications and biologics.. Bispecific antibodies are combination of two antibodies which address distinctive antigens. Bispecific antibodies can recognize a single antigen target also they can identify two different targets at the same time. In recent years, antibody therapy has become a new treatment for various diseases. A bispecific antibody is an upgraded side of monoclonal antibody enhanced in structure and usefulness.
Source: Syndicate Market Research
Posted on Friday, June 17, 2016 at 11:24 am CDT
Temperature management or thermal management is the ability to manage the temperature of a system with the help of technology based on heat transfer and thermodynamics. The temperature management system is a component or area with defined boundaries. The global temperature management market is categorized into two systems on the basis of products, namely, patient cooling systems and patient warming systems.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 10:39 am CDT
The global artificial lift systems market is expected to register a 6.20% CAGR from 2014 to 2020, states a research report by Transparency Market Research (TMR). At this rate, the global artificial lift systems market is expected to reach a value of US$19.80 bn by 2020. There are numerous factors making this remarkable growth rate possible.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 9:50 am CDT
Zion Research has published a new report titled "Refinery Catalyst Market (FCC Catalysts, Hydrotreating Catalysts, Hydrocracking Catalysts, Alkylation Catalysts and Catalytic Reforming) by Materials (Zeolites, Metals, Chemical Compound and Others): Global Industry Perspective, Comprehensive Analysis and Forecast 2014 - 2020." According to the report, the global refinery catalysts market was valued at approximate USD 4.5 billion in 2014 and is expected to reach approximately USD 5.5 billion by 2020, growing at a CAGR of around 3.0% between 2015 and 2020. In terms of volume, global refinery catalysts market stood at approximately 1,500 kilo tons in 2014.
Source: Market Research Store
Posted on Friday, June 17, 2016 at 9:51 am CDT
Zion Research has published a new report titled "Lignin Market (Lignosulfonates, Kraft Lignin and Others) for Concrete Additive, Animal Feed, Dye Stuff, and Other Applications: Global Industry Perspective, Comprehensive Analysis and Forecast 2014 - 2020" According to the report, global lignin market was valued at approximately USD 775 Million in 2014 and is expected to reach around USD 900 million in 2020, growing at a CAGR of slightly above 2.5% between 2015 and 2020. In terms of volume, the global lignin market stood at approximately 1,100.0 kilo tons in 2014.
Source: Market Research Store
Posted on Friday, June 17, 2016 at 9:51 am CDT
Zion Research has published a new report titled "Water Soluble Fertilizers (Nitrogen, Potassium, Phosphate and Others) Market for Fertigation and Foliar Applications: Global Industry Perspective, Comprehensive Analysis and Forecast, 2014 - 2020." According to the report, the global water soluble fertilizers market was valued at USD approximately USD 2.60 billion in 2014 and is expected to reach approximately USD 3.80 billion by 2020, growing at a CAGR of over 5% between 2015 and 2020. In terms of volume, global water soluble fertilizers market stood at approximately 10.0 million tons in 2014.
Source: Market Research Store
Posted on Friday, June 17, 2016 at 10:40 am CDT
Intelligent Building Management Systems Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 - 2023
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 11:25 am CDT
Virtual reality (VR) headset is a device used to deliver virtual reality experience for three dimensional (3D) simulations, computer games, and other applications such as movies, play stations, etc. VR headset consists of an Organic Light-Emitting Diode (OLED) or Liquid Crystal Display (LCD) screen, and head motion tracking sensor to provide effective 3D picture. This sensor tracks the head motion and provides 3D image with up to 360 degree field of view as per head movement.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 10:42 am CDT
Transparency Market Research has published a new report "Bladeless Wind Turbines Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" to its report store.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 10:43 am CDT
Transparency Market Research Reports incorporated a definite business overview and investigation inclines on "Metal Recycling Market". This report likewise incorporates more illumination about fundamental review of the business including definitions, requisitions and worldwide business sector industry structure.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 10:43 am CDT
Transparency Market Research Reports incorporated a definite business overview and investigation inclines on “Building Panels Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 – 2023” This report likewise incorporates more illumination about fundamental review of the business including definitions, requisitions and worldwide business sector industry structure.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 10:44 am CDT
Transparency Market Research has published a new report "Marine Engines Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024" to its report store.
Source: Transparency Market Research
Posted on Friday, June 17, 2016 at 11:27 am CDT
Transparent electronics are, essentially, invisible electronic components such as displays, chips, and circuits. They are made of transparent semiconductor materials with unique properties such as wide bandgap and high concentration of free electrons. Transparent electronic is an emerging technology focused on making thin and transparent electronic devices.
Source: Researchmoz Global Pvt. Ltd.
Posted on Friday, June 17, 2016 at 11:28 am CDT
The global residential solar PV market has been growing since the past four to five years. Energy storage plays a vital role in solar PV installation, as it can store surplus electricity that can be utilized during power outages. This storage using a battery is useful when the amount of electricity generated is greater than the electricity demand. It helps regulate and smoothen the power supply. Various technologies such as li-ion, lead-acid, sodium-sulfur, and other advanced technologies are available for energy storage. Lead-acid batteries are being preferred for energy storage because of inherent advantages such as high dynamic charge acceptance, long shelf life, reliability, and low total cost of ownership.
Source: Researchmoz Global Pvt. Ltd.
Posted on Friday, June 17, 2016 at 11:28 am CDT
Protective packaging involves packaging solutions that provide protection and help in preserving consumer and industrial products, equipment, and machineries from any damaging effects during shipping and storage. Vendors in the market provide innovative protective packaging solutions to industries such as automotive, consumer electronics, appliances, pharmaceutical, and retail to transport products safely to their destinations.
Source: Researchmoz Global Pvt. Ltd.
Posted on Friday, June 17, 2016 at 11:29 am CDT
Power management ICs are used to manage power requirements and support voltage scaling and power delivery sequencing in power electronic devices. They are the key components in any electronic device with a power supply, battery, or power cord, and optimize power usage. They are used in electronic systems such as cellphones, TVs, or computers, and in power-saving technologies such as smart meters and grids.
Source: Researchmoz Global Pvt. Ltd.
Posted on Friday, June 17, 2016 at 11:35 am CDT
Power electronics is the use of solid-state electronics for the control and conversion of electrical energy. Most of the electronic systems are concerned with the transmission and processing of data and signals. These power electronic devices have high power efficiency, high blocking voltage, and the ability to work on low power. The most typical power electronic device is an AC/DC converter, which is used in various applications such as televisions, computers, and battery chargers.
Source: Researchmoz Global Pvt. Ltd.
Posted on Friday, June 17, 2016 at 11:36 am CDT
PET is a polymer resin and is the most common type of plastic used in the packaging industry. It is used in the manufacturing of packaging products such as cups, bottles, vials, jars, and tubs, and other packaging materials for the food & beverages, healthcare and medical, cosmetics, and FMCG industries. Packaging plays a major role in attracting customers to purchase the product. The beverage industry is the largest end-user of PET packaging. Vendors are focussing on producing advanced packaging products to prevent contamination.
Source: Researchmoz Global Pvt. Ltd.