Selbyville, DE -- (SBWIRE) -- 01/21/2019 -- Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters (100 to 165 feet) long, with the most common sizes around 40 meters (130 feet). Longer blades are being designed and tested. Blade weights vary, depending on the design and materials?a 40 meter LM Glasfiber blade for a 1.5 MW turbine weighs 5,780 kg (6.4 tons) and one for a 2.0 MW turbine weighs 6,290 kg (6.9 tons).

Request a discount on standard prices of this premium report at: https://www.marketstudyreport.com/check-for-discount/1175563/

The wind power generation industry has grown rapidly and expanded worldwide in recent years to meet high global demand for clean electricity. In addition, from 2008 to 2014, the cumulative global power generating capacity of wind turbine installations in GWs increased by more than three times.

Wind energy is now used in over 80 countries, 24 of which have more than 1 GW installed. The rapid growth in the wind power generation industry has been driven by population growth and the associated increase in electricity demand, widespread emphasis on expanded use of renewable energy and water resource management, the increasing effectiveness and cost- competitiveness of wind energy and accelerated urbanization in developing countries, among other factors.

Rapid development of global wind energy stimulates the wind turbine blade market as well. Global wind turbine blade production increased from 60155 Units in 2013 to 80972 Units in 2015 with the GACR of 16.02%.

The development of larger wind turbines and recent improvements in wind blade design, materials and manufacturing technology have significantly increased the power generating capacity of wind turbines. Today, wind blades are typically composed of advanced, high-strength, lightweight and durable composite materials. In addition, longer wind blades, which allow for a larger area of wind to be swept by the wind blades, coupled with taller towers, results in greater energy capture and reduces the overall cost of wind energy.

According to the wind turbine, the blades can be divided into the 1.5 MW, 2.0 WM, 3.0 WM, 5.0 WM and so on. The size of blades has positive correlation with the powder of turbines. Blades manufacturers are keen on their blade technology innovation, no matter from the size or the key raw materials.

With the promising market of wind energy, more and more Companies have entered in the wind turbine field in the recent few years. However, LM Wind Power, Vestas, Enercon , Tecsis are still the leaders, when considering the technology and product performance. The four Companies accounted for about 22% production share in 2015.

China has become the faster and the most promising market of wind turbine blade in the recent two years. As information revealed, in 2015, China accounted for about nearly half of wind energy new installed capacity in the world. It is predicted that the wind turbine blade market in China will become more intensified in the coming years, as more and more international Companies cast attention on the region.

Wind Turbine Blade Market Segment by Top Manufacturers Including:
- LM Wind Power
- Vestas
- Enercon
- Tecsis
- Gamesa
- Suzlon
- TPI Composites
- Siemens
- CARBON ROTEC
- Acciona
- Inox Wind
- Zhongfu Lianzhong
- Avic
- Sinoma
- TMT
- New United
- United Power
- Mingyang
- XEMC New Energy
- DEC
- Haizhuang Windpower
- Wanyuan
- CSR
- SANY

Wind Turbine Blade Market Segment by Regions, regional analysis covers:
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Colombia)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)

Market Segment by Type, covers:
- < 1.5 MW
- 1.5 MW
- 1.5-2.0 MW
- 2.0 MW
- 2.0-3.0 MW
- 3.0 MW
- 3.0-5.0 MW
- 5.0 MW

Market Segment by Applications, can be divided into:
- Energy
- Plastics
- Composites
- Other

Request a sample of this premium report at https://www.marketstudyreport.com/request-a-sample/1175563/

There are 15 Chapters to deeply display the global Wind Turbine Blade market.

Chapter 1, to describe Wind Turbine Blade Market Introduction, product scope, market overview, market opportunities, market risk, market driving force;

Chapter 2, to analyze the top manufacturers of Wind Turbine Blade, with sales, revenue, and price of Wind Turbine Blade, in 2016 and 2017;

Chapter 3, to display the competitive situation among the top manufacturers, with sales, revenue and market share in 2016 and 2017;

Chapter 4, to show the global market by regions, with sales, revenue and market share of Wind Turbine Blade, for each region, from 2013 to 2018;

Chapter 5, 6, 7, 8 and 9, to analyze the key regions, with sales, revenue and market share by key countries in these regions;

Chapter 10 and 11, to show the market by type and application, with sales market share and growth rate by type, application, from 2013 to 2018;

Chapter 12, Wind Turbine Blade market forecast, by regions, type and application, with sales and revenue, from 2018 to 2023;

Chapter 13, 14 and 15, to describe Wind Turbine Blade sales channel, distributors, traders, dealers, Research Findings and Conclusion, appendix and data source

For more information on this report at: https://www.marketstudyreport.com/reports/global-wind-turbine-blade-market-by-manufacturers-regions-type-and-application-forecast-to-2023/?utm_source=RELW-SP

About Market Study Report
Marketstudyreport.com allows you to manage and control all corporate research purchases to consolidate billing and vendor management. You can eliminate duplicate purchases and customize your content and license management.

Contact Us:
Market Study Report LLC
4 North Main Street,
Selbyville, Delaware 19975
USA
Phone: 1-302-273-0910
US Toll Free: 1-866-764-2150
Email:sales@marketstudyreport.com
Website:https://www.marketstudyreport.com
Blog: https://www.marketstudyreport.com/blog/