Posted on Wednesday, March 21, 2012 at 3:42 pm CDT
Josh Davids, President of Scytec noted, “DataXchange supports Ethernet based protocols greatly reducing or eliminating hardware at each piece of equipment. It also supports RS-232 serial devices such as CNC machines, CMM's, scanners and RFID hardware. Data collection from MTConnect or Fanuc Focas is great…yet many times there's a need to collect from manual equipment. Keying off of voltage, current, or presence sensors are all methods used as input into DataXchange to identify the state of the equipment.”
Source: Scytec
Posted on Wednesday, March 21, 2012 at 11:06 am CDT
The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec
Posted on Tuesday, March 20, 2012 at 2:42 pm CDT
Overall equipment effectiveness technologies are expensive and start with a pilot program on a few machines; the Scytec Saas model is totally different. At Westec, on Wednesday, March 28, 1:30 - 2:00pm, there is an important presentation: “Cloud Based Machine Utilization, Downtime and OEE Collected & Displayed Real-Time.” This critical event will reveal how real time OEE information can now be collected with no database or reporting servers to install.
Source: Scytec
Posted on Tuesday, March 20, 2012 at 2:02 pm CDT
Typical OEE (overall equipment effectiveness) technologies are expensive and start with a pilot program on a few machines; the Scytec Saas model is totally different. The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec
Posted on Monday, March 19, 2012 at 1:04 pm CDT
Real time configurable dashboard viewing of shop floor data with automatic updating is essential. The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec
Posted on Wednesday, March 14, 2012 at 1:26 pm CDT
The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec
Posted on Monday, March 12, 2012 at 12:17 pm CDT
The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344.
Source: Scytec
Posted on Monday, March 12, 2012 at 11:00 am CDT
Overall equipment effectiveness technologies are expensive and start with a pilot program on a few machines; the Scytec Saas model is totally different. At Westec, on Wednesday, March 28, 1:30 - 2:00pm, there is an important presentation: “Cloud Based Machine Utilization, Downtime and OEE Collected & Displayed Real-Time.” This critical event will reveal how real time OEE information can now be collected with no database or reporting servers to install.
Source: Scytec
Posted on Friday, March 09, 2012 at 2:31 pm CST
Typical OEE (overall equipment effectiveness) technologies are expensive and start with a pilot program on a few machines; the Scytec Saas model is totally different. The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec
Posted on Friday, March 09, 2012 at 10:15 am CST
Real time configurable dashboard viewing of shop floor data with automatic updating is essential. The Scytec DataXchange Process Control System will be previewed on March 27 - 29, 2012 at Westec in the Shop Floor Automations Booth, #2344. This new data collection system has the ability to track multiple types of cycle time. Cycle time can be tracked from a hardware adapter and through MTConnect or Fanuc Focas. Reporting on metrics such as utilization and efficiency, Scytec runs both sets of cycle time and then compares data.
Source: Scytec