City of Industry, CA -- (SBWire) -- 07/17/2018 --This report studies the global Constant Velocity Universal Joint market status and forecast, categorizes the global Constant Velocity Universal Joint market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in North America, Europe, Japan, China, and other regions (India, Southeast Asia, Central & South America, and Middle East & Africa).
Constant-velocity joints (CV joints) allow a drive shaft to transmit power through a variable angle, at constant rotational speed, without an appreciable increase in friction or play. They are mainly used in front wheel drive vehicles, and many modern rear wheel drive cars with independent rear suspension typically use CV joints at the ends of the rear axle halfshafts and increasingly use them on the propshafts (drive shafts).
In the next years, the growth rate of automotive production may decrease in Europe and US, but the enormous automotive population will provide large market demand. In China, the growth rate of automotive production will still be higher than other regions. The situation of automotive constant velocity universal joint industry will be the same.
There is large technical gap between automotive constant velocity universal joints produced by manufacturers from China and abroad. To maintain market share, these domestic manufacturers must invest more on research and development.
In China, the distribution of automotive manufacturers is relatively concentrated, which means the downstream market is concentrated. To get rid of the limit and reduce the risk, automotive constant velocity universal joint manufacturers should seek more automotive manufacturers as cooperative partners.
The global Constant Velocity Universal Joint market is valued at 7410 million US$ in 2017 and will reach 8010 million US$ by the end of 2025, growing at a CAGR of 1.0% during 2018-2025.
The major manufacturers covered in this report
GKN
NTN
AAM
Meritor
Wanxiang
Dana
Nexteer
Hyundai WIA
JTEKT
IFA Rotorion
SKF
Seohan Group
Guansheng
Neapco
Feizhou Vehicle
Heri Automotive
Xiangyang Automobile Bearing
Geographically, this report studies the top producers and consumers, focuses on product capacity, production, value, consumption, market share and growth opportunity in these key regions, covering
North America
Europe
China
Japan
Southeast Asia
India
We can also provide the customized separate regional or country-level reports, for the following regions:
North America
United States
Canada
Mexico
Asia-Pacific
China
India
Japan
South Korea
Australia
Indonesia
Singapore
Rest of Asia-Pacific
Europe
Germany
France
UK
Italy
Spain
Russia
Rest of Europe
Central & South America
Brazil
Argentina
Rest of South America
Middle East & Africa
Saudi Arabia
Turkey
Rest of Middle East & Africa
On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into
Ball Type
Fork Type
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including
Passenger Vehicle
Commercial Vehicle
The study objectives of this report are:
To analyze and study the global Constant Velocity Universal Joint capacity, production, value, consumption, status (2013-2017) and forecast (2018-2025);
Focuses on the key Constant Velocity Universal Joint manufacturers, to study the capacity, production, value, market share and development plans in future.
Focuses on the global key manufacturers, to define, describe and analyze the market competition landscape, SWOT analysis.
To define, describe and forecast the market by type, application and region.
To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
To identify significant trends and factors driving or inhibiting the market growth.
To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
To strategically profile the key players and comprehensively analyze their growth strategies.
In this study, the years considered to estimate the market size of Constant Velocity Universal Joint are as follows:
History Year: 2013-2017
Base Year: 2017
Estimated Year: 2018
Forecast Year 2018 to 2025
For the data information by region, company, type and application, 2017 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.
Key Stakeholders
Constant Velocity Universal Joint Manufacturers
Constant Velocity Universal Joint Distributors/Traders/Wholesalers
Constant Velocity Universal Joint Subcomponent Manufacturers
Industry Association
Downstream Vendors
Available Customizations
With the given market data, QYResearch offers customizations according to the company's specific needs. The following customization options are available for the report:
Regional and country-level analysis of the Constant Velocity Universal Joint market, by end-use.
Detailed analysis and profiles of additional market players.
Request Sample Copy of Report@ https://www.qyresearch.com/sample-form/form/85329/global-constant-velocity-universal-joint-market
About Us:
QYResearch always pursuits high product quality with the belief that quality is the soul of business. Through years of effort and supports from huge number of customer supports, QYResearch consulting group has accumulated creative design methods on many high-quality markets investigation and research team with rich experience. Today, QYResearch has become the brand of quality assurance in consulting industry.
Contact US
QY Research, INC.
17890 Castleton,
Suite 218,
City of industry, CA – 91748 ?
USA: +1 626 295 2442
Email ? enquiry@qyrsearch.com
Web ? www.qyresearch.com
Global Constant Velocity Universal Joint Market Will Reach 8010 Million US$ by 2025 - QY Research, Inc.