Rockville, MD -- (SBWire) -- 04/26/2018 --The global market discussion on industrial motor brakes can be found in an upcoming report titled "Industrial Motor Brakes Market Forecast, Trend Analysis & Competition Tracking - Global Review 2018 to 2028", which is going to be published in the wide database of Fact.MR. Industrial motors are usually stopped using natural deceleration. However, the process needs instantaneous retardations where the industrial motor brake find its significance. Industrial Motor Brakes i.e. electromagnetic brakes are employed in various kinds of high speed & high cycle rate machines which find their applications in various end use industries such as packaging, food and beverage, printing etc. The advantage of using industrial motor brakes over the mechanical or hydraulic brakes is that the motor brakes do not have any wearable parts and are steady enough. The Industrial Motor Brakes work on the principle of countercurrent braking which is done by disconnecting the industrial motor and reconnecting the same the other way around. The torque is expected to be higher than the starting torque in order to ensure that the motor doesn't start in the reverse rotation.
Request TOC of this Report- https://www.factmr.com/connectus/sample?flag=T&rep_id=559
There are two types of braking in the case of industrial motors, DC injection braking and dynamic braking respectively. In the case of DC Injection braking, the DC current is applied to the stationary windings of the AC motor after the power to the motor has been disconnected. Dynamic braking is the process of connecting a running motor to the industrial motor where in the connected motor acts as a generator and converts the mechanical energy produced by the industrial motor into electrical energy. The heat is dissipated through resistor and the industrial motor is stopped immediately.
Industrial Motor Brakes Market: Drivers and Challenges
Industrial Motor Brakes are evident tools in the manufacturing and process industries as natural braking would consume a lot of time. With increase in the production rates and the need for accomplishment of job within the time limit has eventually turned out as a driver for the industrial motor brakes market. In addition to this, the increasing number of new and upcoming industries has facilitated for more demand in industrial motor brakes market.
As the motor brakes have advantages over the conventional methods, most of the manufacturers throughout the globe are preferring them. This has been observed as a new and emerging trend in the market and thus favoring the same. With extensive use, there is some scope for aftermarket services too. This happens to create more opportunity for the industrial motor brake manufacturers. Although the market looks fair, there is a restraint with respect to this. The restraint being, a large number of top contenders for this product. This makes it difficult for the manufacturers to make profitable transactions.
To know more about Industrial Motor Brakes Market Trends, check the link - https://www.factmr.com/report/559/industrial-motor-brakes-market
Industrial Motor Brakes Market: Segmentation
On the basis of type, the Global Industrial Motor Brakes Market can be segmented into:
DC Brake
AC Brake
Torque
On the basis of braking mode, the Global Industrial Motor Brakes Market can be segmented into:
Holding
Overhauling Braking
Load Assisted Braking
Soft Stop Braking
On the basis of application, the Global Industrial Motor Brakes Market can be segmented into:
Regenerative Braking
Dynamic Braking
Plugging
On the basis of End Users, the Global Industrial Motor Brakes Market can be segmented into:
Metals & Mining
Construction
Manufacturing
Processing
Others
Industrial Motor Brakes Market: Regional Overview
Industrial motor brakes of a great significance in all the industries globally. The scope for these brakes is equally distributed in the regions such as China, India, ASEAN, Latin America, North America and Europe. Adoption of such systems in Africa is anticipated to pace up eventually. More significantly, U.S., Canada and European regions are expected to create better value for the industrial motor brakes market.
Industrial Motor Brakes Market: Key Players
Major Market participants identified across the value chain of the Industrial Motor Brakes are Warner Electric, Inc., Brook Crompton UK Ltd., Eaton, Sterling Controls, Ogura Industrial Corp., Altra Industrial Motion., EMTorq, Force Control Industries, Tolomatic, Toshiba International Corporation, Havells.
Pre-book this Report- https://www.factmr.com/checkout/559/S
About Fact.MR
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
Contact Us
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com
Web: https://www.factmr.com/
Read Industry News at - https://www.industrynewsanalysis.com/
Industrial Motor Brakes Market Forecast, Trend Analysis & Competition Assessment During 2018- 2028