Jamangar, Gujarat -- (SBWIRE) -- 04/22/2012 -- Precision Brass Parts India is a GIDC Jamnagar based manufacturer of Brass electrical components and turned parts.Precision Brass Parts have recently launched a new range of Brass cable glands for hazardous area applications.
Precision Brass Parts India with factory located at GIDC industrial estate Shanker tekri Jamnagar are known to be a manufacturer of Brass turned parts Cnc components and a wide range of electrical components including Brass cable glands and neutral links earth bars and Grounding clamps.
Precision Brass Parts have laucnhed a new range of Brass cable glands for hazardous area applications. This cable gland range incorporates innovative features that along with safety, enable faster installation, facilitate inspectability of the cable gland in it's operable condition, prevent corrosion of the cable armour/braid and in some cases help to go beyond the requirement of merely having the appropriate certification
The features of the Brass cable glands are as follows-
Unique Rear Sealing System
This arrangement offers IP66, IP67, IP68 (30 metres for 7 days), NEMA 4X and Deluge (DTS01) Ingress Protection. The seal is manufactured from a silicon material, has LSFZH properties, is ozone and oil resistant and is suitable for use at both high and low temperatures. The ear Sealing System covers the entire range of cable diameters without the need for special seals and the cable acceptance range is stamped on the backnut for ease of inspection. The backnut can be hand tightened, with only one further spanner turn required to ensure IP66, IP67, IP68 and NEMA 4X.
Unique Inspectable Compound Chamber
The revolutionary compound chamber has been designed with inspectability in mind. The pre-lubricated compound chamber can be removed once the compound has fully cured, allowing full inspection of the flameproof seal. If required, minor surface voids can be repaired in-situ. This unique patented compound chamber now forms the compound as well as providing a flameproof seal.
Zero Cable Damage
The unique diaphragm sealing system does not damage cables which exhibit ‘Cold Flow’ characteristics. The diaphragm type seal is currently the only elastomeric seal to comply fully with IEC/EN 60079-14 and is therefore suitable on effectively filled ‘cold flow’ cables which would otherwise require barrier style cable glands. Our diaphragm seal is also unique in that it is the only flameproof elastomeric seal that can be visually inspected in operation – a real benefit to inspectors.
Apart from this range of Brass cable glands, precision Brass parts India also offer a variety of products like Brass Pipe Fittings, Brass Cable Glands, Brass Electrical Components ,Brass CNC Parts Components ,Brass Conduit Fittings , Brass Screws Fasteners, Brass Nuts, Brass Inserts,Brass PPR Fittings, Brass Sanitary Fittings, Brass Earthing Accessories etc.
Company products can be viewed at http://www.precision-brass-parts.com ,http://www.precision-brass-parts.com/product.htm and http://www.precision-brass-parts.com/resources.htm for more details.
About Precision Brass Parts
Precision Brass Parts (http://www.precision-brass-parts.com) based in Gujarat, Jamnagar India, leading manufacturer and exporter of brass cable glands, brass CNC components, Brass screws machine parts, brass inserts to international markets worldwide.
Copyright © 2005-2014 - SBWire, The Small Business Newswire - All Rights Reserved - Important Disclaimer
Contact Us: 888-4-SBWIRE (US) - 920-593-5640 (International)