Automotive Die Casting Lubricants Market: Global Industry Trend Analysis 2012 to 2017 and Forecast 2017 - 2025
New York, NY -- (SBWIRE) -- 04/27/2017 -- Automotive Die Casting Lubricants Market: Introduction
The automotive die casting lubricants are required for high pressure die-casting machines while manufacturing. It is a substance introduced to reduce friction between moving parts in the automotive metal casting process. Developing technological trends have led to the modification of highly engineered automotive die casting lubricants to overcome the problems faced while casting (such as air bubble formation, lube formation, irregular finishing) and to enhance the quality of die casting process. Significant evolution has been observed in the automotive die castings lubricants market over the past few years. For instance, automotive parts made from high melting alloys of magnesium or aluminum are cast at high pressures for thorough cavity filling. Thus, high quality automotive die casting lubricants are required to withstand severity of high pressures and temperatures.
A sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/15307
High Pressure Die Casting (HPDC) technology is expected to gain prominence in near term. It aids in complex and high quality casting at high temperatures, hence offering higher productivity. Thus, a new market shift is anticipated in the automotive die casting lubricants market over the forecast period. In the near future, die casting is expected to expand across all prominent markets where casting is required in a wide range of sizes and shapes. This anticipated increase in manufacturing is projected to push demand for the automotive die casting lubricants market.
Automotive Die Casting Lubricants Market: Drivers and restraints
Automotive manufacturers are inclined towards reducing the weight of vehicle by using light weight metal components in place of steel, so as to improve fuel efficiency. This trend is prompting automotive die casting lubricants manufacturers to develop new die-casting lubricant composition materials and technologies – hence acting as driver for the market. Manufacturers are also looking for developing eco-friendly automotive die casting lubricants to comply with Environment Protection Agency Toxic Release Inventory (EPA TRI) and reduce scrap accumulation, metal fumes and combustion byproducts. In order to meet environment regulations, water-based lubricants containing lower Volatile Organic Compounds (VOCs) are preferred over other counterparts. This is forecasted to drive the automotive die casting lubricants market over the forecast period.
However, efficiency of the automotive die casting lubricant depends upon the effectiveness of functional additives used in the formulation of it. Also, inability to adapt to temperature variations in the casting process may affect the efficiency of the automotive die casting lubricant.
Automotive Die Casting Lubricants Market: Segmentation
Automotive die casting lubricants can be classified on the basis of the type of additives used as:
Metal Flow Additives
Hydrodynamic and Extreme Pressure Additives
Automotive die casting lubricants can be classified on the basis of the type of application as:
Cold Chambers Machines
Hot Chamber Machines
Automotive die casting lubricants can be classified on the basis of the type as:
Automotive Die Casting Lubricants Market: Region wise outlook
Among these regions, Europe is forecasted to dominate the automotive die casting lubricants market over the forecast period. Die casting has become significantly popular globally with the increase in demand for car parts, internal combustion engines, oil pumper bodies, transmission cases, clutch housings and valves and fitting applications, among others. The Asia Pacific region is expected to offer better opportunities for the automotive die casting lubricants market owing to rapid growth in industrialization in the coming future. The U.S. is expected to account for significant market share in the automotive die casting lubricants market during the forecast period due to intense competition with overseas production in the automotive casting market.
To view TOC of this report is available upon request @ http://www.persistencemarketresearch.com/toc/15307
Automotive Die Casting Lubricants Market: Players
Examples of some of the renowned players in the automotive die casting lubricants market are listed below:
Chem-Trend L. P.
Henkel AG & Co. KGaA
The Hill And Griffith Company
McGee Industries, Inc.
Quaker Chemical Corporation
Sunrise Chemtech Private Limited
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, types and applications.
The report covers exhaustive analysis on:
Supply & Demand
Competition & Companies involved
Regional analysis includes:
Middle East & Africa
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts, and industry participants across the value chain. The report provides an in-depth analysis of parent market trends, macroeconomic indicators and governing factors, along with market attractiveness within the segments. The report also maps the qualitative impact of various market factors on market segments and various geographies.
Detailed overview of parent market
Changing market dynamics in the industry
In-depth market segmentation
Historical, current and projected market size in terms of volume and value
Recent industry trends and developments
Strategies of key players and products offered
Potential and niche segments, geographical regions exhibiting promising growth
A neutral perspective on market performance
Must-have information for market players to sustain and enhance their market footprint
About Persistence Market Research
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.
To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
Persistence Market Research
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353