Fuboon International Unveils the Latest Achievements for the Development About the Metalized Material

Top grade manufacturer for the metalized ceramic:


Xiamen, China -- (SBWIRE) -- 07/17/2013 -- Although the composite of the Metalized Ceramics is more complex than conventional alloy, it could also used as the material for cutting tool. This kind of Metalized Ceramics tools has had specific performance which could give people a number of advantages in the time of finishing. The expert from website has told people these advantages. One is that if cutting edge of the cutting tool with the ceramic material has been worn, the cutting edge could be re-sharpened again. The second advantage is the chemical properties of this kind of ceramic tool are stability.

In addition, this kind of cutting tools could not need the infiltration effect. Recently, it has been conducted a newest study for the latest generation of grades for the Metalized Ceramics. In this kind of material, the Co was used as the metal paste which has been instead of the mixture of Ni and Co. In addition to non-pollution, this kind of new material also has many advantages which have been borrowed from the traditional stronger alloy.

This newly developing Metalized Ceramics could have great improvement in the following areas. The first factor is about the higher ability for processing safety. The second is the broadly application areas.

On the other hand, the Metallized Ceramics for Vacuum interrupters which have been produced by the Metallized Ceramics for Vacuum interrupters have higher finishing surface and high accuracy. However, the intensity of these kinds of Zirconia ceramic components would be much stronger.

In a word, the performance of this material has had greatly improvement. However, this kind of result has been mainly achieved by improving of following areas. The first area is the balance between resistance and plastic deformation. The second point is about the finer and more durable cutting edge line. The last is the anti-cracking performance thermal expansion and contraction.

In the past, the Metalized Ceramics could give people the impression which is not good. This disadvantage is mainly due to that this kind of processing tool such as Ceramic tube and Precision ceramic balls could be snapped suddenly. But now, people can minimize this dangerous by increasing the toughness of this kind of tool. However, this well improvement could increase the security ability. In the past, in order to solve this problem about the performance, some vendors had developed the Metalized Ceramics with strong wear resistance but poor toughness and the excellent toughness but poor performance grades.

Today, the development of technology has already helped people solve this problem properly. The performance and ability of Metalized Ceramics has been improved greatly. In the future, this kind of Zirconia ceramic components would become the mainstream in the industrial area.

Fuboon International Co., Ltd
Address: Huli Area, Tongan Industry Concentration Area, Xiamen China
Tel: 86-592-8930516
Fax: 86-592-3780866
Email Address:
Daily product
Industry product