Micronized Polytetrafluoroethylene (PTFE), also known as polytetrafluoroethylene micro powder, is used where higher surface lubricity and anti blocking properties are required.
New York, NY -- (SBWIRE) -- 06/16/2016 -- Micronized Polytetrafluoroethylene (PTFE), also known as polytetrafluoroethylene micro powder, is used where higher surface lubricity and anti blocking properties are required. Micronized PTFE is prepared by the utilization of virgin PTFE resin or recycled PTFE scrap. In order to make micronized polytetrafluoroethylene, virgin or recycled PTFE scrap is irradiated via technologies such as thermal degradation and electron beam irradiation. After the irradiation, the PTFE resin is ground into micro powders.
Request TOC (table of content), Figures and Tables of the Report: http://www.persistencemarketresearch.com/toc/4855
Micronized PTFE resin is used in a wide range of industries such as thermoplastic, coating, ink, elastomers and lubricant and grease, for the enhancement of physical and chemical properties such as tensile strength, wear resistance, lubricity, and flame retarding attributes. Improving infrastructure and increasing infrastructural spending, coupled with rising disposable incomes of the average consumer, is expected to drive the demand for coating market. This in turn provides strong growth opportunities for the micronized polytetrafluoroethylene market.
Asia Pacific and North America are the key contributors to the growth of the global micronized polytetrafluoroethylene market where China and the U.S., respectively, occupy a majority chunk of the market share. Demand for micronized PTFE in these two countries is driven by a strong domestic production base of ink, coating, thermoplastic and elastomer industries.
The ink industry is the largest consumer of micronized PTFE market and the U.S. dominates the global printing ink market in both value and volume terms. Printing ink consumption in China stood at 305.7 thousand metric tons in 2005 and rose to 592.6 thousand metric tons in 2010, before further increasing to 1,046.9 thousand metric tons by the end of 2014. Strong growth in the packaging, e-commerce, and -books markets is driving the demand for printing ink consequently intensifying the growth of micronized PTFE.
Japan, South Korea, and India, in that order, are the other major markets for micronized PTFE after China. Owing to continuous industrialization and the rise of the manufacturing sector, Asia Pacific is projected to reflect the highest growth during the forecast period. Rising innovation and developments in the micronized PTFE consumer industries for high-quality products is positively impacting the use of PTFE micro powders.
On the basis of end-users, the global micronized polytetrafluoroethylene market is segmented into: Inks, coating, thermoplastic, elastomer, and others. The ink industry, followed by coating, remains the largest consumer of micronized PTFE globally.
However, the thermoplastic industry witnessed the highest growth among all end-users. The global thermoplastic market is growing robustly thanks to an increasing demand from the automotive industry, advancement in the TPE processing industry, and replacement of EPDM and EPR. This in turn, is providing growth opportunities to the micronized PTFE market in the thermoplastic industry. Leading manufacturers of thermoplastics such as tyrenic block copolymer (SBC), thermoplastic olefins (TPO), thermoplastic vulcanizates (TPV), thermoplastic polyurethane (TPU), copolyester ether (COPE), and polyether block amide (PEBA) are continuously focusing on the development of bio-based thermo plastic – a factor that is again driving the growth of micronized PTFE market.
To Buy this Full Report: http://www.persistencemarketresearch.com/checkout/4855
Some leading global players operating in the micronized polytetrafluoroethylene market include: Shamrock Technologies, Inc, Daikin Industries Ltd., E.I. DuPont De Nemours & Company, Solvay SA, Micro Powder, Inc, 3M, Asahi Glass Co., Ltd, Chenguang Research Institute of Chemical Industry, Gujarat Fluorochemicals Limited, Reprolon Texas, Guarniflon S.p.A, and Shanghai 3F New Materials Company Limited.
Key geographies evaluated in this report are:
France, Germany, Italy, Spain, and the UK
Key points covered in the report
1) Report segments the market on the basis of types, application, products, technology, etc (as applicable)
2) The report covers geographic segmentation
3) The report provides the market size and forecast for the different segments and geographies for the period of 2010 to 2020
4) The report provides company profiles of some of the leading companies operating in the market
5) The report also provides porters five forces analysis of the market.
PMR for Journalist: http://www.persistencemarketresearch.com/page/journalist-resources.asp
About Persistence Market Research
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.
To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.