ResearchMoz

New Release - China RF Industry Report, 2013-2014: Global Market Research Report

ResearchMoz.us include new market research report " Global and China RF Industry Report, 2013-2014: Industry Size, Shares, Growth, Analysis, Trends And Forecast" to its huge collection of research reports.

 
Repost This

Albany, NY -- (SBWIRE) -- 05/13/2014 -- This report studies GaAs RF components, including:

- Introduction to GaAs
- Analysis on GaAs Industry
- Analysis on RF downstream market
- Trends of mobile RF systems
- 19 RF companies

View Full Report with TOC at: http://www.researchmoz.us/global-and-china-rf-industry-report-2013-2014-report.html

Qualcomm's RF360 design is changing the entire mobile RF industry revolutionarily. GaAs PA is facing a fierce attack from CMOS PA. Qualcomm's CMOS PA subverts the opinion that CMOS PA can only be used on low-end phones. Specifically for CMOS PA, Qualcomm designs QFE1100, which is a front-end module involved with envelope tracking technology. QFE1100 can help CMOS PA improve thermal efficiency, reduce heat by 30% and cut down power consumption by 20%.

ZTE’s flagship mobile phone Grand S II LTE uses Qualcomm’s CMOS PA -QFE2320 and QFE2340 for the first time. The combination of QFE2320 and QFE2340 can cover all major cellular modes, including LTE TDD / FDD, WCDMA / HSPA +, CDMA 1x, TD-SCDMA and GSM / EDGE, with the RF band of 700MHz to 2700MHz. Qualcomm has basically monopolized smartphone Modem or CPU markets, and may dominate the PA field. However, mobile phone vendors will still cooperate with GaAs PA suppliers in order to ensure their equal status.

Nevertheless, the focus of mobile RF industry has been shifting from PA to filter. In the 4G era, the most valuable part of mobile RF system is filter, especially BAW, rather than PA. The biggest difference between 4G and 3G lies in BAW which is an essential part for 4G. A regional LTE phone needs a BAW valued USD1.25, a SAW worth USD2.25 and a PA which only costs USD1.75. As for a global roaming LTE phone, a SAW tagged with USD3, a BAW with USD3.5 and a PA with USD2 are required.

Browse More Reports related to Semiconductors: http://www.researchmoz.us/semiconductors-market-reports-63.html

The biggest event in the RF industry in 2014 must be RFMD’s takeover on Triquint. Triquint suffered consecutive losses in 2012-2013; in Q1 2014, its revenue fell by 3.6% year on year, and its operating margin was negative 11.3% (negative 18.8% in the same period of previous year, negative 3.2 % in the fourth quarter of previous year). The company’s losses were mainly attributed to the aggressive capacity expansion (as much as seven manufacturing centers) before 2011 and excessive expectations. Additionally, Triquint showed serious dependence on large customers, particularly 57% of its revenue came from Apple. On the contrary, RFMD just went out of its predicament. RFMD placed undue reliance on its client NOKIA in its early years, but it witnessed poor performance in 2011-2012 under the impact of NOKIA. However, RFMD recovered in 2013 and its operating revenue increased substantially. RFMD took a fancy to Triquint’s BAW technology.

Related Reports:-

Printing Equipment for Printed Electronics 2014-2025

The unique report addresses the applications and technologies of printing, curing and key integration equipment that is enabling printed electronics. The report assesses the performance of each printing and curing technology type, providing for each:

- Assessment of capability and suitability to printing different types of materials
- Analysis of existing uses of the printing technology in printed electronics
- Trends and opportunities for the printing technologies
- Leading suppliers and company profiles

Browse Full Report at: http://www.linkedin.com/today/post/article/20140513061716-262727479-printing-equipment-for-printed-electronics

Industrial And Commercial LED Lighting (Industrial, Commercial, Architectural, And Outdoor) Market - Global Industry Size, Market Share, Trends, Analysis And Forecast, 2013 - 2019

LED lighting delivers high efficiency, high level of brightness, long lifespan and high reliability. LED lights are manufactured using semiconductor components and emit less radiated heat as compared to other products such as incandescent and fluorescent. According to the U.S. Department of Energy (DOE), LEDs emit very less heat compared to incandescent bulbs (90%) and CFLs (80%).

The report includes segmentation of Industrial and Commercial LED Lighting market by end user and geography. Further, it provides current and forecast market size by revenue for the aforementioned categories. Cross sectional analysis for end user and geography segments is a part of the scope. Factors influencing and inhibiting the growth of the market have been analyzed. Porter’s five forces analysis offers insights on market competition.

Browse Full Report with TOC at: http://www.researchmoz.us/industrial-and-commercial-led-lighting-industrial-commercial-architectural-and-outdoor-market-global-industry-size-market-share-trends-analysis-and-forecast-2013-2019-report.html

About ResearchMoz
ResearchMoz ( http://www.researchmoz.us/ ) is the one stop online destination to find and buy market research reports. Our market research databases integrate statistics with analysis from global, regional, country and company perspectives. We provide the market context, competitor insight and future trends needed for strategic planning.

For More Information Kindly Contact:
Mrs.Sheela AK
Tel:+1-518-618-1030
Toll Free: 866-997-4948
Email: sales@researchmoz.us
Blog: http://marketingresearchreport.wordpress.com/