QY Research has recently published a report based on electronics and semiconductors industry. The key objective of this report is to highlight various trends and dynamics, new and innovative technology and mergers and acquisitions that are expected to make a positive impact on the overall industry. QY Research has provided the comprehensive evaluation of electronics and semiconductors industry and has shared in-depth information about its various features.
City of Industry, CA -- (SBWIRE) -- 09/21/2018 -- This study focuses on the production side and consumption side of Potentiometer, presents the global Potentiometer market size by manufacturers, regions, type and application, history breakdown data from 2013 to 2018, and forecast to 2025.
In terms of production side, this report researches the Potentiometer capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and product type.
In terms of consumption side, this report focuses on the consumption of Potentiometer by regions and application. The key regions like North America, Europe, Asia-Pacific, Central & South America, Middle East and Africa etc.
There are three types of potentiometers that are used commonly: wire wound, carbon film and Plastic Film potentiometers. All these have been described below:
1) Wire wound potentiometers: This potentiometer comprises of several rounds of wire wound around the shaft of the non-conducting material. The turns of the coil are bonded together by an adhesive. In this case the slider, connected to the body whose displacement is to be measured, moves on the potentiometer track and it makes contacts with successive turns of the coil. In this case the wire between the two successive turns is not covered by the slider, which limits the resolution of the wire wound potentiometers. However, the larger the number of turns of the coil, more is the resolution of the coil. The resolution is measured as the reciprocal of the number of turns of the coil. This devise has low noise and is mechanically rough and tough.
2) Carbon film potentiometers: The carbon film potentiometers are formed by depositing carbon composition ink on an insulating body, which in most of the cases is phenolic resin. This is one of the most commonly used materials for the pots that is quite cheap and has resolution better than the wire wound potentiometers. They have reasonable life and tolerable noise levels.
3) Plastic Film pots: These pots comprise of the specially impregnated plastic material having resistance characteristics that are controlled properly. These can be used for rotary as well as translational slider movements. They have very good life, resolution better than the wire wound pots, and low noise.
In carbon film and the Plastic Film pots the resolution is limited by the grain size of the particles, hence their accuracy is very high. Their resolution can be as high as 10 rest to -4 and is usually limited only by the spring connected between the slider and the body whose motion is to be measured.
Global giant manufactures mainly distributed in Japan, U.S.A. and Western European. The manufacturers in Japan have a long history and unshakable status in this field. Manufacturers such as ALPS, Panasonic and NOBLE have relative higher level of product's quality. As to U.S.A., TOCOS has become as a global leader. In Europe, ABB and Siemens lead the technology development. Most of Chinese manufactures locate in Taiwan and Guangdong, Zhejiang province.
There are international companies set up factories in China either, such as ALPS whose plant is located in Guangdong province.
The key consumption markets locate at developed countries. The China takes the market share of 29.9%, followed by U.S.A. with 16.17%. While the products in U.S. market are higher-end. U.S. consumption market has a quicker growing speed of CAGR 4.3%.
We tend to believe this industry becomes more and more mature, and the consumption increasing rate will show a smooth curve.
The Potentiometer market was valued at 3030 Million US$ in 2017 and is projected to reach 3740 Million US$ by 2025, at a CAGR of 3.0% during the forecast period. In this study, 2017 has been considered as the base year and 2018 to 2025 as the forecast period to estimate the market size for Potentiometer.
This report includes the following manufacturers; we can also add the other companies as you want.
TOCOS
ALPS
ABB
Siemens
Panasonic
Song Huei
BOURNS
CTS Corporation
NOBLE
TT Electronics
Request Sample Copy of Report@ https://www.qyresearch.com/sample-form/form/717305/global-potentiometer-industry-research-report-growth-trends-and-competitive-analysis
Taiwan Alpha Electronic Co., Ltd.
Market Segment by Product Type
Carbon Film
Plastic Film
Wirewound
Market Segment by Application
Home Appliances
Communication Products
Instrumentation
Automotive Products
Others
Market size split by Region
North America
Asia-Pacific
Europe
Central & South America
Middle East & Africa
Request to Buy Full Report@ https://www.qyresearch.com/settlement/pre/ce53368be4b71f64549c1018619fbc65,0,1,Global%20Potentiometer%20Industry%20Research%20Report%252C%20Growth%20Trends%20and%20Competitive%20Analysis%202018-2025
About QYResearch
QYResearch always pursuits high product quality with the belief that quality is the soul of business. Through years of effort and supports from huge number of customer supports, QYResearch consulting group has accumulated creative design methods on many high-quality markets investigation and research team with rich experience. Today, QYResearch has become the brand of quality assurance in consulting industry.
Contact US:
QY Research, INC.
17890 Castleton,
Suite 218,
City of industry, CA – 91748
USA: +1 626 295 2442
Email: enquiry@qyresearch.com
Web: http://www.qyresearch.com