Future Market Insights has announced the addition of the “ Permanent Magnet Generators Market: Global Industry Analysis and Opportunity Assessment 2017-2027" report to their offering.
Valley Cottage, NY -- (SBWIRE) -- 08/07/2017 -- The rate of consumption of conventional energy sources is expanding day by day. This has presented non-conventional energy sources as an alternative to traditional energy sources. Renewable energy sources, for example, wind, solar, biogas, small-scale hydro power plants, etc. provide enhanced ecological protection. Declining fossil fuels supply and the damaged environment, which in some ways can be blamed on the conventional energy sources, have made it more important to discover other energy sources. Permanent magnet generators are becoming more popular day by day. They renewable are used to convert mechanical energy produced by rotor blades to electrical energy. The energy conversion is based on Faraday's laws of electromagnetic induction, that dynamically induces an electro-motive force i.e. e.m.f into the generators coils as it rotates. In permanent-magnets generators, permanent magnets are incorporated in the conventional rotor of an induction generator. Since these generators do not leave behind any residue or untreatable waste, they are fast becoming an extremely popular choice.
Permanent magnet generators are widely used in small wind turbines. These days, they are also being used in large offshore and onshore wind turbines. These generators are superior replacements of traditional induction motors and can easily be attached with diesel generators, turbines and hybrid vehicles. These generators can also be utilized as part of wind as well as water machines. Some of the advantages of permanent magnet generators are self-protection against short circuits and severe overloads and easy maintenance.
The permanent magnet generators can be a direct current voltage machine with a rotary collector and brushes or an alternating current synchronous multiphase machine where the rotor and the stator magnetic fields are rotating at a similar speed. This removes the excitation losses in the rotor, which generally amount to 20% to 30% of the collective generator losses. The reduced losses additionally give a lower temperature rise, which essentially means that a simpler and smaller cooling system can also be used in the generator. In case of permanent magnet AC synchronous generator, the inductor is located at the rotor whereas in permanent magnet DC generator, the inductor which consists of a coil or wire loop is set up at the stator with a group of permanent magnets. In general, direct current permanent magnet generators are a preferred choice for wind turbine systems that operate at a small scale as they can work at low rotational speeds and give high degree of reliability with minimum maintenance costs. Their cut-in point is genuinely low and thus, they are also able to provide good proficiency particularly in light wind conditions.
Request A Sample Copy Of This Report at: http://www.futuremarketinsights.com/reports/sample/rep-gb-2684
Permanent Magnet Generators: MarketDynamics
The interest in permanent magnet generators is increasing day by day. Since electricity is becoming expensive with every passing day, individuals are searching for an alternative energy source and permanent magnet generators fit seamlessly in that place. These devices do not use any environmental resources to produce energy and in this way, are environment friendly. Other than this, no by products or wastage is produced by these generators during the energy generation process. Environment specialists have been making a special case for permanent magnet generators as these can diminish the pollution effect by up to 50%. Demand for permanent magnet generator is increasingly growing in wind turbine systems because of their numerous advantages.
Permanent Magnet Generators: MarketSegmentation
Based on type of machine, the global permanent magnet generatorsmarket is segmented into the following:
Permanent Magnet AC generator
Permanent Magnet DC generator
Based on speed, the global permanent magnet generatorsmarket is segmented into the following:
Low speed PMG
Medium speed PMG
High Speed PMG
Request Report TOC (Table of Contents) @ http://www.futuremarketinsights.com/toc/rep-gb-2684
Based on end-use, the global permanent magnet generatorsmarket is segmented into the following:
Wind turbine systems
Hydro turbine systems