Future Market Insights has announced the addition of the “Automotive Rocker Arm Market: Global Industry Analysis and Opportunity Assessment 2017-2027" report to their offering.
Valley Cottage, NY -- (SBWIRE) -- 05/19/2017 -- An engine's efficiency depends on various factors; among which, its capacity of air processing plays an important role in the production of power. An internal combustion engine uses an air-fuel mixture to produce power, but air is relatively difficult to consume as compared to fuel. The automotive rocker arm is an important part of the internal combustion engine. An automotive rocker arm is an oscillating lever that converts the radial movement of cam lobe into a linear movement at the poppet valve, so as to open it. When the camshaft lobe lifts the outer side of the automotive rocker arm, the inside presses the valve stem down so as to open the valve and air is sucked into the cylinder. Hence, the automotive rocker arm plays an important role in providing a means of multiplying the lift ratio, which is crucial in the working of an engine.
Automotive Rocker Arm Market: Trends, Drivers, Restraints
Nowadays, due to various technologies and inventions, many automobile manufacturers focus on producing light weight engine. Attributing to this, designers attempt to reduce the weight of an engine by reducing the weight of various parts used in it. Lightweight automotive rocker arms are commonly used in high rpm applications. As steel has more fatigue strength and stiffness, many manufacturers are using steel automotive rocker arms, which are as light as aluminum ones. Further to this, reduced weight of the automotive rocker arm equates to less load on valve springs, which produce more rpm.
Aftermarket automotive rocker arm manufacturers are coming up with new technologies and inventions that are helping the automotive rocker arm industry grow. Also, increasing demand for automobiles globally is fueling growth of the global automotive rocker arm market. Many companies are using various lightweight materials, such as aluminum, and steel, among others in the manufacturing of automotive rocker arms – so as to reduce the overall weight of an engine. Lightweight automotive rocker arms are essential for efficient operation, but strength also plays an important role in the life of an automotive rocker arm.
Request For Sample@ http://www.futuremarketinsights.com/reports/sample/rep-gb-3388
An automotive rocker arm is a crucial part of an engine, as its failure makes the engine useless. Moreover, it is expensive to replace and procure automotive rocker arms. Automotive rocker arms fail mainly due to stress concentration and as an effect of loading. This problem of failure has not been completely overcome and designers are trying to explore new technologies and methods to prevent it. Attributing to this reason, various companies are investing heavily in research and development.
Automotive Rocker Arm Market: Segmentation
The global automotive rocker arm market can be segmented by design, type of engine, material used, vehicle type, type of engine (based on fuel used), and vehicle application.
On the basis of design, the global automotive rocker arm market is segmented as:
Stamped steel rocker arm
Roller tipped rocker arm
Full roller rocker arm
Shaft rocker arms
Centre pivot rocker arms
End pivot (finger follower) rocker arms
On the basis of type of engine, the global automotive rocker arm market is segmented as:
Push rod engines
Overhead cam engines
On the basis of material used, the global automotive rocker arm market is segmented as:
Steel rocker arms
Anodized-aluminum roller rockers
High-strength alloy aluminum rocker
High-strength alloy steels
On the basis of vehicle type, the global automotive rocker arm market is segmented as:
On the basis of type of engine (based on fuel used), the global automotive rocker arm market is segmented as:
On the basis of vehicle application, the global automotive rocker arm market is segmented as:
Light commercial vehicles
Medium and heavy commercial vehicles
Request For TOC@ http://www.futuremarketinsights.com/toc/rep-gb-3388
Automotive Rocker Arm Market: Market Participants
Examples of some of the market participants in the global automotive rocker arm market, identified across the value chain include:
Schaeffler Technologies AG & Co. KG
Indo Schottle Pvt. Ltd.
HITCHINER Manufacturing Co. Inc.
Maharashtra Forge Pvt. Ltd.
Decora Auto Forge Pvt. Ltd.
Woosu Ams Co. Ltd.
Guangzhou Kowze Auto Parts Co. Ltd
Ghaziabad Precision Products