New York, NY -- (SBWIRE) -- 02/06/2019 -- Rod Ends Market: Overview
Rod ends also known as heim joints or rose joints are a type of bearing used in oscillating assemblies to reduce friction. It consists of a bearing mostly spherical, in the eye-shaped head of the rod end housing with integral shank. The rod ends misalign axially and thus allows the machinery to work efficiently even under misaligned or oscillating conditions. The other advantages of rod ends are it helps in eliminating edge stress and the excessive stress caused by adjacent components within a working machinery. The rod ends can constitute of plain spherical, ball or roller bearing. The sliding surface of the bearing is mirror finished and hence it smoothly can rotate within the housing. The rod ends can be non-lubricating or self-lubricating. The non-lubricating rod ends are made up of steel and are used in applications which has shock loads, alternating heavy loads or static heavy loads. The non-lubricating rod ends are provided with grooves for lubrication. The self-lubricating rod ends which are maintenance free has a self-lubricating sliding surface in combination with steel. These rod ends are used in applications where the friction coefficient should be less and no re-lubrication facility is provided.
Rod Ends Market: Drivers and Restraints
The rod ends are used in wide applications like automobiles, aerospace, industrial machinery, construction, etc. as it supports a wide range of mechanical tolerances, which can boost the overall growth of the global rod ends market. The use of rod ends is cost-effective solution since it substitutes welded or more sophisticated assemblies, and is a major driving factor for global rod ends market. The properties of rod ends like robustness and less maintenance also contributes in the growth of global rod ends market.
Request Sample Report@ https://www.persistencemarketresearch.com/samples/11026
The introduction of inexpensive, self-lubricating rod ends which do not require any re-lubrication or maintenance are anticipated to limit the growth of global non-lubricating rod ends market.
Rod Ends Market: Segmentation
On the basis of product type, the global rod ends market can be segmented as follows:-
Right hand thread
Right hand thread
Left hand thread
On the basis of number of components, the global rod ends market can be segmented as follows:-
On the basis of material, the global rod ends market can be segmented as follows:-
Steel/ PTFE (Polytetrafluoroethylene - Teflon)
On the basis of PTFE lining type, the global maintenance free rod ends market can be segmented as follows:-
PTFE sintered bronze
PTFE FRP (Fibre reinforced plastic)
On the basis of lubrication, the global rod ends market can be segmented as follows:-
External lubrication – Grease
Self-lubrication – Teflon liner
On the basis of end use sector, the global rod ends market can be segmented as follows:-
Rod Ends Market: Region Wise Outlook
The global rod ends market can be divided into seven regions, namely North America, Latin America, Western Europe, Eastern Europe, Asia Pacific Excluding Japan (APEJ), Japan and Middle East and Africa (MEA). APEJ holds major share in global rod ends market due to the high number of mechanical and automotive industries in the region. In APEJ, China has the major share in global rod ends market because of increasing industry capacity and consumer consumption. Western and Eastern Europe together hold the second position in global rod ends market due to the presence of well-established automotive industries. North America also has a significant market share due to several aerospace and defence equipment manufacturing industries in this region. Japan is expected to register moderate growth rate in global rod ends market during the forecast period.
Request TOC@ https://www.persistencemarketresearch.com/toc/11026
Rod Ends Market: Key Players
Some of the key players in the global rod ends market are as follows:
RBC Bearings Incorporated
Minebea Co., Ltd.
AST Bearings LLC
THK CO., LTD.
New Hampshire Ball Bearings
NIPPON THOMPSON CO., LTD.