Mattituck, NY -- (SBWIRE) -- 09/29/2017 -- It is important for organizations to ensure that their employees are working in a safe environment. Reliable and safe floors must be encouraged in every place of work. If a floor has some cracks, even if they are small, there is a possibility of tripping and falling which can be dangerous.
The good thing is that this is a situation that is preventable. For companies to achieve safety success, KwikBond shares why companies should fix cracked flooring and ways to respond to the problems that are associated with commercial concrete crack repair. Read on to know why there is a need for industrial concrete repair.
Not only does a company need to provide a safe working environment for employees, but also for customers. If a commercial building has customer traffic in and out, the flooring can be a hazard if there are cracks and chipped concrete. Trips and falls happen more often on flooring that has been damaged.
A company that uses forklifts and other equipment often has more concrete cracks than others. The equipment can cause stress to the flooring due to their weight and frequent use. Repair these cracks, chips, and other damages to ensure that productivity is not slowed down. Slower productivity and use of equipment often results in lower sales volume.
A company can learn which products are the most effective for their application of concrete repair. See below for tips on which products to use.
Products to Use
There are many reasons for considering industrial concrete repair. And it is equally important to know which products to use. The products that companies choose from may depend on how severe the cracks are in the floor. The quality of the product a company uses is also crucial. A commercial concrete flooring crack can be repaired, leaving it firm for many years with the right product. One ingredient that is best in concrete repair is epoxy.
Use of Epoxy
One of the best ways of dealing with cracks that are non-moving is the injection of an epoxy concrete repair product. It is an excellent method of repair as it gives the concrete its strength regarding structure.
Advantages
- Restores structures
- Has higher bond strength compared to concrete
- It is safe for surfaces that are dry
- Applicable to many surfaces
Disadvantages
- It is not useful regarding moving foundations
- If it is applied on wet surfaces, there is drastic decrease in bond strength
- Costs higher than urethanes
Important Steps To Follow In Repairing Concrete Flooring
1. Before starting the process of repair, find out what caused the crack. A concrete repair job will fail if the cause of the crack is not fixed. The issue could still cause another crack to happen after the repair.
2. After the identification of what has caused the crack, determine whether injection is the best solution. There are other products that can fix concrete cracks, depending on the severity of the crack.
3. It's always important to prepare the surface of the concrete. Some products will work in wet environments and some will not. In order to ensure a proper fix and safe conditions, check the product to be sure the surface is prepared properly.
It is important to note that contaminants and liquids can have effects on the epoxy, reducing its effectiveness.
4. Clean the crack surface before starting. It can be done with compressed air as it removes particles, dust or stagnant water quickly. To remove these items before repairing a concrete surface will ensure a long-lasting repair and safer environment for employees and customers.
Visit http://www.Kwikbond.com for help with choosing the right commercial concrete repair products.
About Capital Industries, Inc.
Capital Industries, Inc. is a leading supplier of commercial and industrial concrete repair products. For over 30 years, we have proudly serviced contractors, factories, warehouses and distribution centers for industrial, institutional and commercial customers. We carry a full range of concrete repair materials, including those specifically designed for low temperature areas such as freezers and coolers. Our floor repair products are rapid hardening, allowing you to reopen repaired areas with minimal downtime. All of our products are designed to be used by in-house maintenance personnel and come with an ironclad 100% guarantee of satisfaction.
Contact:
Len Garrett
http://www.kwikbond.com
info@kwikbond.com
Phone: 631-298-6300
Fax: 631-298-2077
Address: PO Box 1693 Mattituck, NY 11952