Seattle, WA -- (SBWIRE) -- 11/18/2016 -- The report "Waste Disposal Regulations for Drilling Mud & Cuttings Technology, Cost Trends, Environmental Impact and Regional Regulatory Bodies by Mud Type (Water-Based, Oil-Based, Synthetic Based), by Region and Markets Analysis with Forecast", This study integrates, summarizes, and analyzes the disposal regulations for drilling waste in key countries. It also offers detailed qualitative and quantitative regulations with regard to fluid type.

Browse 97 tables and 10 figures spread through 104 Pages and in-depth TOC on "Waste Disposal Regulations for Drilling Mud & Cuttings"

Speak to Analyst: http://www.marketsandmarkets.com/speaktoanalyst.asp?id=119824692

OSPAR countries have high growth potential for drilling waste management services, owing to the limited number of norms to be followed for the disposal of water-based muds.

The report on drilling waste management regulations details the country-wise regulations imposed by respective governmental, federal, or local agencies on the discharge and disposal of the drilling waste generated during exploration and drilling. Drilling and exploration activities generate two types of waste: drilling cuttings and used drilling fluids. Most of the wastes associated with oil & gas drilling activities pose significant threats to the environment. These wastes need to be effectively treated and disposed of to minimize their impact on the environment. The report also provides details about various technologies used for drilling waste management. The technologies analyzed in the study include solids control, waste recycling/reuse, onsite disposal/burial, bioremediation, incineration, thermal desorption, and deep well injection.

Water-based mud is the most widely adopted mud across the globe, given its minimal environmental impact and disposal regulations.

On the basis of mud type, waste disposal regulations are subsegmented into water-based, oil-based, and synthetic-based. Oil-based and synthetic-based muds both fall under the category of non-aqueous drilling fluid type. Non-aqueous fluids are composed of either refined oil or synthetic materials as the primary fluid phase, unlike water-based drilling fluids, which have fresh water or salt water as their primary base fluid. Water-based mud is the most commonly used mud and accounts for over 80% of the market, owing to its eco-friendliness and easy availability. This type of drilling mud is subjected to the least number of prohibitions and limitations. Most countries allow offshore discharge and disposal of water-based muds and cuttings.

North America and Europe impose the strictest disposal regulations.

The North American region comprises the U.S. and Canada countries that enforce multiple laws and legislation dealing with the disposal and discharge of drilling wastes. The region therefore accounts for more than half of the drilling waste services market. The North American market has been hit hard by the fall in global crude oil prices, with the U.S. drilling rig count declining by nearly 60% from January 2015 to January 2016. The U.S. is divided into five prime regions with regard to regulations—namely, the U.S. Gulf of Mexico, California, Louisiana, Texas, and the rest of the U.S.

Onsite disposal is the most preferred disposal method among companies.

Companies implement various technologies, such as solids control, waste recycling/reuse, onsite disposal/burial, bioremediation, incineration, and thermal desorption, for drilling waste management. Different drilling waste management technologies entail different cost structures, depending on multiple factors such as personnel, equipment special fluids or additives, transportation, and transportation equipment cost. Top companies providing onsite burial technology include Schlumberger Ltd. (U.S.), Halliburton (U.S.), Baker Hughes (U.S.), Weatherford International (U.S.), National Oilwell Varco (U.S.), and Scomi Group Berhad (Malaysia).

The key associations that oversee and implement regulations for waste discharge are Environment Canada, Fisheries and Ocean Canada, National Energy Board (Canada), Newfoundland Offshore Petroleum Board (Canada), Nova Scotia Offshore Petroleum Board (Canada), Department of Commerces National Oceanic and Atmospheric Administration (NOAA) (U.S.), U.S. Fish and Wildlife Services, and United Kingdom Onshore Operators Group (UKOOG), among others.

Request for Sample: http://www.marketsandmarkets.com/requestsample.asp?id=119824692

About MarketsandMarkets
MarketsandMarkets is the world's No. 2 firm in terms of annually published premium market research reports. Serving 1700 global fortune enterprises with more than 1200 premium studies in a year, M&M is catering to a multitude of clients across 8 different industrial verticals. We specialize in consulting assignments and business research across high growth markets, cutting edge technologies and newer applications. Our 850 fulltime analyst and SMEs at MarketsandMarkets are tracking global high growth markets following the "Growth Engagement Model – GEM". The GEM aims at proactive collaboration with the clients to identify new opportunities, identify most important customers, write "Attack, avoid and defend" strategies, identify sources of incremental revenues for both the company and its competitors.

M&M's flagship competitive intelligence and market research platform, "RT" connects over 200,000 markets and entire value chains for deeper understanding of the unmet insights along with market sizing and forecasts of niche markets. The new included chapters on Methodology and Benchmarking presented with high quality analytical infographics in our reports gives complete visibility of how the numbers have been arrived and defend the accuracy of the numbers.

We at MarketsandMarkets are inspired to help our clients grow by providing apt business insight with our huge market intelligence repository.

Contact:
Mr. Rohan
MarketsandMarkets INC.
701 Pike Street
Suite 2175, Seattle,
WA 98101, United States
1-888-600-6441
Email: sales@marketsandmarkets.com
Website: www.marketsandmarkets.com