SBWire

Color cosmetics are personal care products that help to enhance the appearance of the human body. Color cosmetics refer to the colorants and cosmetic ingredients used for make-up, skin care, personal hygiene, hair care, fragrance and oral care. Color cosmetics include products such as foundations, eye shadows, nail paints, powders, lipsticks, concealers, bronzers and other. On the basis of type of product, color cosmetics market can be segmented into face, eye, lip and nail and others.

Medical tapes, also called as surgical tapes, refer to the pressure-sensitive adhesive tapes that are used in wound management. Medical tapes hold the bandage or other dressing in a correct position over wound. Medical tapes have hypoallergenic adhesive which holds the medical tape firmly over skin. These tapes allow air to pass through them, thus do not cause any damage to skin. On the basis of adhesiveness, medical tapes market can be classified into single sided medical tapes and double sided medical tapes.

Wound refers to a physical injury leading to disruption of normal structure of cells or tissues. Wound management technologies refer to the different technologies that are applied for proper management of that wound. It is done to promote healing and prevent further complications linked with wound. Wound management technologies market is driven by growing prevalence of chronic wounds. On the basis of different wound care therapies, wound management technologies market can be segmented into traditional wound care and advanced wound care. Traditional wound care technologies consists of absorptive dressings, composite dressings, gauze dressings, compression therapy and contact layers. Whereas, market for advanced wound care segment can be segmented into moist wound care, wound care devices and wound care biologics. Moist wound care technology consists of foam dressings, hydrocolloid dressings, alginate dressings and hydrogel dressings. Wound care devices consist of ultrasound devices, wound closure devices and negative pressure wound therapy (NPWT). Wound care biologics segment consists of cell based therapeutics, collagen based therapeutics and skin replacement therapeutics.

Scar is a mark on the skin which appears due to damage of skin. Some of the major causes of scarring are infections, injuries, surgery, inflammation of tissue, acne and others. Technological advancements in scar treatment rise in research and development activities, increasing consumer disposable income and growing consciousness about appearance are the main driving forces for the growth of scar treatment market. On the basis of type of scar, scar treatment market can be segmented into burn scars, post-surgical scars and others. Burn scars are also known as hypertrophic scars. Post-surgical scars treatment varies with the degree of scaring. On the basis of product, scar treatment market can be segmented into gels, oils, creams and sprays. On the basis of treatment, scar treatment market can be segmented into invasive surgical treatment, elastic wraps, gel sheets and laser treatment. Scar treatment products are the alternatives to invasive surgical treatments. Scar treatment can remove the scars which are caused by surgeries such as appendectomy and by aesthetic reasons such as reduction in the appearance of acne scars. Some scars are hypersensitive and have low ability to remove.

Automation and control system is integration of IT technology with mechanical systems. These systems are used for reliable and standardize production system. Reductions of waste, effortlessness monitoring and packaging and speed production are some of the advantages of automated and control system. In automation various devices and instruments are attached with IT systems for improved results in automation. It is offering customers with improved quality with standardization and dependable products within the time and at inexpensive cost. Several steps are necessary for new production and development of active pharmaceutical ingredient products. In addition, production requirements in pharmaceutical industry are increasing day by day. In pharmaceutical and biotech industry automation and control systems are mainly used for manufacturing and packaging, to provide high product quality. It also helps the pharmaceutical and biotech industry by saving energy and improving efficiency in manufacturing and packaging.

Cancer is a disease caused due to abnormal growth of cells. It leads to uncontrolled multiplication of cells into other tissues. Cancer cells can spread to other parts of the body through lymph and blood system. There are various types of cancers such as breast cancer, prostate cancer, lung cancer, colon cancer, skin cancer and lymphoma. Globally, it is the leading cause of deaths. Breast cancer is the most common form of cancer in women. According to World Health Organization (WHO) in 2012, approximately 8.2 million people died due to cancer. Similarly, according to American Cancer Society more than one million people suffer with cancer every year. Most cases of cancer are diagnosed and detected after a tumor is visible or felt. Tissue diagnostic plays crucial role for diagnosis, monitoring and management of cancer disease. Tissue diagnostics is also used for the diagnosis of next generation sequencing, decoding cancer molecular profiles and circulating tumor cells. Tissue diagnosis is done by fine needle aspiration cytology, open biopsy and core biopsy. The degree to which cancer has invaded the healthy tissue, stage and type of cancer can be determined with the help of biopsy. It helps to analyze the biopsy at molecular level to determine the course of treatment. Tissue diagnostics is used by pharmaceutical companies, contract research organizations, research laboratories and hospitals for the diagnosis of cancer. Some of the major tissue diagnostic tests are immunohistocheistry (IHC), hexatoxylin & eosin (H&E) and in situ hybridization (ISH).

The G8 Oil and gas industry guide provides top-line qualitative and quantitative summary information including: market size (value and volume 2010-14, and forecast to 2019). The guide also contains descriptions of the leading players including key financial metrics and analysis of competitive pressures within the market.

Global Motor insurance industry guide provides top-line qualitative and quantitative summary information including: market size (value 2010-14, and forecast to 2019). The guide also contains descriptions of the leading players including key financial metrics and analysis of competitive pressures within the market.

This industry report offers the most up-to-date market data on the actual market situation, trends and future outlook for lighting products in the world. The research includes historic market data from 2008 to 2014 and forecasts until 2019 which makes the report an invaluable resource for industry executives, marketing, sales and product managers, analysts, and other people looking for key industry data in readily accessible and clearly presented tables and graphs.

This industry report offers the most up-to-date market data on the actual market situation, trends and future outlook for knives in the world. The research includes historic market data from 2008 to 2014 and forecasts until 2019 which makes the report an invaluable resource for industry executives, marketing, sales and product managers, analysts, and other people looking for key industry data in readily accessible and clearly presented tables and graphs.

The recreation of the Lewis and Clark expedition in reverse is a photo journal and an epic film project by Kenneth Warren Higby Sr. A companion project of UPT-21 Urban Planting Table project; the project's objective is to address the unemployed disabled crises in the United States by creating public awareness. All funds raised from Kickstarter will be spent on project completion and disabled employment.

Wound closure devices are apparatus that help in closing a wound by pulling the edges of the wound tissue together and aid in healing. Devices such as sutures, staples, adhesives, mechanical wound closure devices and strips aid in lending strength and tissue to the wound tissue, minimize tissue trauma and reduce risk of infection and excess scaring.

Machine to Machine also known as M2M, is a cumulating set of technologies which combines both wireless and wired network systems for communicating with other devices. The basic components of M2M systems are a sensory device which grabs signals and transmits them further to a network which could be both wireless as well as wired; an application software to process such data and finally into a relevant information. Certain major machine to machine technologies which are currently in vogue are 2G and 3G technologies, Wireless Fidelity (WiFi), Ethernet, ZigBee etc.

Social networking advertising is the means of gaining attention of customers by utilizing social networking portals. Increasing use of internet and social media have forced marketers to find better ways of communication and engagement with customers so as to increase the efficiency of advertising, increase their customer base and create loyal customers.

After the evolution of global positioning system (GPS) in 1990, there have been many new technologies developed for determining the geographical coordinates for moving and fixed objects. Mobile positioning system is one of these innovations which are used to trace an object or person on or above the earth surface.

Mobile commerce is handled by devices like laptops, cellular phones, Smart phones and tablet computers to execute online commercial transactions. Mobile commerce is experiencing continuous growth in a variety of fields including sales and purchase of a wide range of services and goods, payments of bills, net banking and so on. All these transactions are collectively known as m-commerce or mobile commerce.

Capacitive sensors are devices that enable the measurement of the position of a conductive or nonconductive surface. The high-resolution sensing ability of these sensors makes them highly popular in detection and measurement of position, proximity, acceleration, and fluid levels. Currently, capacitive sensing is widely being used in devices like mobile phones, tables, other mobile devices, laptop trackpads, and in many other applications.

Roaming prices have confronted criticism in recent years and are undergoing significant changes at this present time. The European Commission has imposed regulation to the pricing of voice roaming charges and it saw the introduction of capped wholesale and retail voice prices for calls made within the EU on 30th August 2007, followed by capped SMS prices in July 2009 and wholesale and retail data prices also with further prices changes each year thereafter including SMS. Roaming is to be abolished in the EU at the end of 2015, with many operators already offering roam like home options.

Copper denoted by the symbol Cu is a ductile metal with very high electrical and thermal conductivity. Copper is soft and malleable in its pure form and is used to fabricate pipes and cables. Copper finds application in various building material, high speed data transmission, solar energy, storage of nuclear waste, superconductor and metal alloys. Copper compounds are also used as fungicides, wood preservatives and bacteriostatic substances.

Growing awareness towards the use of renewable energy and emerging applications of such energy for day to day applications is bolstering the growth of the solar cooker market. Solar energy not only has been proven as a viable form of energy generation, but high levels of development in the solar PV market have increased the overall application segments of solar energy. There are several advantages of using these solar cookers. Solar cookers are capable of carrying out pasteurization processes and are extremely effective in retaining the nutrient content of food. High levels of portability are another major advantage of such solar cookers. The compact size of these cookers makes them capable of being sold in the retail market without giving rise to logistical bottlenecks.

Water trading is a voluntary transfer of certain quantity of water between the buyer and the seller, so that the buyer of water can satisfy the demand at its end. It is a solution for all the verticals of end users that need water. Therefore, water trading serves as a solution for different users such as urban and agricultural that provides equal price and allocates water according to the demand. As quoted by the Forbes, there are many projects which have done hundreds of transactions of water worth USD 10 trillion across the globe. It has also identified several water projects and programs such as Water Quality Trading (WQT), Payments for Watershed Services (PWS), Dar es Salaam, Heredia, Saltillo and many others on global basis. Apart from these projects, there are other flow restoration or ground water mitigation projects as well.

The rapid industrial development has led to the increased demand for the conventional sources of energy. However, the limited presence of these sources put an extra burden on the demand supply gap. As the population continues to grow, the conventional sources of energy must be used more efficiently, and alternative sources are needed to close the demand and supply gap. Gas to liquids (GTL) technology converts the methane rich gases into more economical and cleaner synthetic fuels. The increase in energy consumption coupled with the environmental regulations related to the clean fuel development, can have a direct impact on global gas to liquids (GTL) market. For the past few years, many big companies have started to develop the synthetic fuels, based on gas to liquids (GTL) technology. According to World Bank, around 150 billion cubic meters of natural gas is flared ever year, which can be converted into useful synthetic fuels using gas to liquids (GTL) technologies.

In economic terms, electricity (both power and energy) is a commodity capable of being bought, sold and traded. An electricity market is a system for conducting sales, purchases, and short-term trades. Bids and offers use supply and demand principles to set the price. Short-term trades are contracts similar to power purchase agreements and are generally considered private bi-lateral transactions between counterparties. Retail transactions (bids and offers) in electricity are typically cleared and settled by the market operator or a special-purpose independent entity charged exclusively with that function. Market operators do not clear trades but often require knowledge of the trade in order to maintain generation and load balance. The commodities within an electric market generally consist of two types: power and energy. Power is the metered net electrical transfer rate at any given moment and is measured in megawatts (MW). Energy is electricity that flows through a metered point for a given period and is measured in megawatt hours (MWh).

This research report on the global fuel ethanol market helps create a strategically important market characteristic study by studying market trends on both regional and global scales. It offers its readers a broad range of market data analyses, which allows the creation of tactics for the market that can be changed with the help of recent trend evaluations. The report also explains how the industry is indirectly competing against the food industry to balance out the production of vegetables for consumption and production of ethanol.

Uranium is mostly used in nuclear power plants to generate electricity. The rising demand for electricity and the capacity of nuclear reactors is driving the uranium market. The global uranium market is expected to witness significant growth in next six years. Nearly 75% of uranium supply is through mining activity and it is expected to grow further in the coming years.