SBWire

Light trucks are the trucks or truck-based vehicles which have a payload capacity of less than 4,000 pounds or 1,815 kg. These trucks in the U.S. are known as light-duty trucks and in the European countries similar vehicles are popularly known as light commercial vehicle. Federal regulation of the U.S. defines light trucks as any motor vehicle which has a gross weight (curb weight and payload weight) of not more than 8,500.0 pounds or 3,855.5 kg. Light trucks are used for three purposes: for the purposes of transportation of property from one place to another, as a carrier vehicle for transportation of persons from one destination to another and to be used off-street or off-highway operation. Light trucks have lower fuel economy standards compared to cars, so these vehicles are used for utilization purposes rather than personal use purpose.

Marine grease is a jelly or semisolid lubricant derived from minerals, soap or bio-based materials with added chemicals that make it hydrophobic. Marine grease has high viscosity index, high thermal resistance and hence does not oxidize easily. Marine greases are useful to machinery that can only be lubricated rarely and wherever lubricating oil would not dwell in position such as heavy loaded sliding and rolling motion found in marine application. It acts as sealants to avoid entrance of water. Grease-lubricated bearings possess superior frictional characteristics owing to their high viscosity index.

Electric vehicles are powered by electric motors, which uses energy from rechargeable batteries. Electric vehicle are more user and environmental friendly as compared with gasoline based vehicles. These vehicles do not produce any tailpipe emissions, reduces dependency on oil and are cheaper to operate. Based on their power source, there are three types of electric vehicles: directly powered from an external power station, powered by stored electricity originally from an external power source and powered by an on-board electrical generator. Electric vehicles are very popular in low power and low range applications such as milt floats and golf buggies. However this technology is still in nascent stage for mainstream transportation, especially in developing countries. In recent years the electric vehicles segment has attracted the attentions of consumers as well as governments. According to a report by Electric Vehicle Initiative (EVI) and International Energy Agency (IEA), global electric vehicle sales became two folds between the year 2011 and 2012 and this growth is expected to be higher in coming years.

The environmental protection is becoming a major concern for the world today, government laws, and industry association advocate to use the continuous emissions monitoring systems (CEMS) in manufacturing plant to ensure the safety of workers, workplace and environment. These CEMS devices are used to detect toxic and hazardous gases in order to maintain safety. Flue gas analyzer is one of the important device under CEMS system which plays an important role in protection of atmosphere from toxic and hazardous gases while increasing the efficiency of the plant. Generally, a flue is pipe, duct or opening of chimney which are used to exhaust gases to outdoors from boiler, generator of furnaces installed in manufacturing facility. Flue gas analyzer is a device that detects and monitors the composition of exhausting gases from furnaces or boilers and help to determine the proper ratio of air and fuel. Flue gas analyzer directly measures and displays flue gas, temperatures and differential pressure.

Leading Architectural GlassSuppliersVision Design Projects Ltd are delighted to announce the addition of GlasMarte(GM) Glass Railing system to their range of glass balustrade products. The innovative modular railing system resolves many historic glass railing design issues and takes the tolerance control and the final installed visual lines to previously aspirational levels.

According to a new market report published by Persistence Market Research "Global Market Study on Electric Bus: Asia Pacific to Witness Highest Growth by 2020", the global electric bus market is expected to grow at a CAGR of 28.0% during 2014 to 2020, to reach an estimated volume sales of 33,854 units by 2020.

Persistence Market Research (PMR) announces the release of its latest report titled, "Global Market Study on Home Care Chemicals: Asia Pacific to Witness Highest Growth by 2020". According to the report, the global home care chemicals market was valued at US$ 16.1billionin 2014. The global home care chemicals market is expected to reach US$ 21.1billionby 2020, registering a compounded annual growth rate of 4.6% through the forecast period.

According to a new market report published by Persistence Market Research "Global Market Study on Gas Leak Detector Market - Asia Pacific to Witness Highest Growth by 2020",The global gas leak detectors market accounted for US$ 2,312.2 Mn in 2014 and while exhibiting a CAGR of 5.3% over the forecast period. The Global Gas Leak Detector Market is expected to reach US$ 3143.67 Mn by the end of 2020, representing a CAGR of 5.29% through 2015 to 2020.

According to a new market report published by Persistence Market Research "Global Market Study on Delivery Systems in Personal Care - Asia to Witness Highest Growth by 2020", the global personal care delivery system market was valued at US$ 345,287.3 thousand in 2014 and is expected to expand at a CAGR of 7.8% from 2014 to 2020, to reach US$ 543,373.2 thousand by 2020.

According to a new market report published by Persistence Market Research "Global Market Study on Stevia Market - Beverages will Remain the Dominant Application Segment through 2020", the global stevia market was valued at US$ 347 million in 2014 and it will expand at a CAGR of over 8% to reach a valuation of US$ 565 million by 2020.

LBS Market in China 2016 size, share, growth, trends, review, research, industry analysis and forecast upto 2020 by Market Research Store

Zion Research has published a new report titled "Monochloroacetic Acid Market for Cellulosics, Agrochemicals, Thioglycolic Acid, Surfactants and Others Applications: Global Industry Perspective, Comprehensive Analysis and Forecast, 2014 - 2020." According to the report, global demand for monochloroacetic acid was valued at USD 850.0 million in 2014 and is expected to reach USD 1,050.0 million in 2020, growing at a CAGR of slightly above 3.0% between 2015 and 2020. In terms of volume, the global monochloroacetic acid market stood at around 700.0 kilo tons in 2014.

Zion Research has published a new report titled "Plant Growth Regulators (Auxins, Cytokinins and Others) Market: Global Industry Perspective, Comprehensive Analysis, Size, Share, Growth, Segment, Trends and Forecast, 2014 – 2020" According to the report, the global plant growth regulators market was valued at approximately USD 3.5 billion in 2014 and is expected to reach approximately USD 6.4 billion by 2020, growing at a CAGR of around 8.2% between 2015 and 2020.

Zion Research has published a new report titled "Powder Coatings Market for Automotive, Consumer Goods, General Industry, Architectural, Furniture and Other Applications - Global Industry Perspective, Comprehensive Analysis and Forecast, 2014-2020." According to the report, global demand for powder coatings was valued at USD 7.5 billion in 2014, and is expected to reach USD 11.0 billion in 2020, growing at a CAGR of 6.8% between 2015 and 2020. In terms of volume, the global powder coatings market stood at 2,045.0 kilo tons in 2014.

EasternCCTV, located in New York City, is now offering a comprehensive range of WDR Cameras that provides high dynamic range imaging. These wide dynamic range cameras are capable of detecting items in both dark and extremely bright areas. The WDR cameras that the company offers capture high quality video that will look much better in situations where there are very wide light differences in the scene. With their high resolution video recording, WDR cameras impart a high level of safety and security to an individual's property. Manufactured employing cutting-edge technology, these cameras are broadly used for commercial and residential buildings. Investing in these WDR cameras can help individuals in keeping their properties safe.

Zion Research has published a new report titled "Plastic Packaging (Rigid Plastic Packaging and Flexible Plastic Packaging) Market for Food & Beverages, Industrial, Household Products, Personal Care, Medical and Other Applications - Global Industry Perspective, Comprehensive Analysis and Forecast, 2014-2020." According to the report, global demand for plastic packaging was valued at USD 270.0 billion in 2014, and is expected to reach USD 375.0 billion in 2020, growing at a CAGR of 4.8% between 2015 and 2020. In terms of volume, the global plastic packaging market stood at 81,750.0 kilo tons in 2014.

Market Research Store : Published latest report on "Global Produce Packaging - Global Market Outlook (2015-2022)" into their database.

At the annual meeting of the Widener University Health Care Management Alumni Association, Paul Szklarski, FACHE was elected president of the Association for the coming year. He is the fourth president to preside over this young alumni association.

Leading Architectural Glass Suppliers Vision Design Projects Ltd are delighted to announce the addition of Glas Marte (GM) Glass Railing system to their range of glass balustrade products. The innovative modular railing system resolves many historic glass railing design issues and takes the tolerance control and the final installed visual lines to previously aspirational levels.

Adore Cosmetics, a leading purveyor of organic skin care and beauty products, has announced the launch of a new skincare blog called Adore Cosmetics Insights.

A clinical trial management system (CTMS) is a software system used by pharmaceutical, Clinical Research Organizations (CROs), healthcare and biotechnology industries to control clinical trials in clinical research. Also, it is a software solution for good management, storage and study of drug associated clinical data.

Concentrated solar power (CSP) is also called as concentrated solar thermal. Solar energy can be used to create electricity in two separate ways. First is solar concentrators and the second is photovoltaic systems. Concentrated solar power is a technology that generates electricity by concentrating solar energy in a main point. It is use to focus sunlight. Concentrated solar power plant generates electric power uses mirrors to concentrate the large area of sunlight onto a small area and also focus the sun's energy. CSP can also provide combined power and heat, particularly in desalinization plants. Concentrated solar power technologies subsist in five general types, such as parabolic trough, enclosed trough, concentrating linear Fresnel reflector, dish Stirlings and solar power tower.

VoIP stand for Voice over Internet Protocol. VoIP is a service that manipulates assorted data and voice transmission technologies to provide communication services over a packet-switched network. The technologies used in VoIP Service include IP telephony, voice over broadband and Internet telephony. This service support digital signals for transmitting data over IP based network. VoIP services are executed by means of a broad range of protocols such as H.323, Session Initiation Protocol (SIP), Inter Asterisk exchange (IAX), Real Time Protocol (RTP) and Media Gateway Control Protocol (MGCP).

Bearings are machine elements that are primarily used for reducing friction between moving parts. For instance, in case of a roller bearing, the rolling elements in the bearings withstand the load, allowing the device to spin smoothly. With technological advancements in several industry verticals such as automotive, construction, and oil and gas, the applications and functionalities of bearings are evolving continuously. High end technologies such as smart bearings facilitate manufacturers to monitor bearing operations constantly.

Dairy processing equipment is utilized for processing of milk to make different products such as butter, cream and cheese among others. These equipments help to increase the output, reduce time for packaging and labor cost. These equipments have widespread applications such as processing, manufacturing, pasteurizing, transporting storing, packaging activities of dairy products. Dairy processing plants include equipment such as complete process lines, plate heat exchangers, tubular heat exchangers, ultra high temperature equipment, evaporation systems, cream churner milk container, storage tanks, butter churns and mixers. Raw materials required for manufacturing these equipments are stainless steel (SS) plates, mild steel rods, SS sheets, mild steel sheets, SS section and SS rods.