SBWire

Financial stability and rising average age of parents lead to higher expenditure on baby care and convenience products, which has resulted in positive growth of the global baby care products market. The growing number of live births in emerging nations, rise in disposable incomes of parents, and the increasing number of women entering the mainstream workforce across the globe are some of the factors anticipated to boost demand for baby care products in the near future. In 2011, the global baby care products market stood at US$44.7 billion and is anticipated to touch US$66.8 billion by the end of 2017, growing significantly at a 7.0% CAGR between 2012 and 2017.

Polypropylene is a thermoplastic polymer that can be readily formed by catalytic polymerization of propylene. Manufacture of polypropylene is largely dependent on the availability of raw materials. This, in turn, is dependent on crude oil and natural gas reserves. Polypropylene possesses beneficial properties such as high surface hardness, good tensile strength, and strong chemical resistance. As a result, it has gradually replaced other polyolefins in several applications. It is one of the most versatile polymers used in packaging, automobile, construction, electrical & electronics, and medical industries. Rising demand for polypropylene in the packaging industry is likely to augment the global polypropylene market in the next few years. Additionally, rising demand for lightweight vehicles is expected to drive growth of the polypropylene market during the forecast period. However, growing environmental issues and volatile raw material prices are projected to hamper growth of the market during the forecast period. Biobased polypropylene is likely to offer immense opportunities to polypropylene manufacturers from 2015 to 2023.

The report analyzes and forecasts the benzaldehyde market on the global and regional level. The study provides historical data of 2014 along with forecast from 2015 to 2023 based on volume (Tons) and revenue (US$ Mn). The study includes drivers and restraints for the benzaldehyde market along with their impact on demand during the forecast period. The report also analyzes opportunities in the benzaldehyde market on the global and regional level. Drivers, restraints, and opportunities mentioned in the report are justified through quantitative and qualitative data. These have been verified through primary and secondary resources.

Rising demand from packaging and healthcare industries coupled with technological developments are expected to drive the polypropylene random copolymer market between 2015 and 2023. Polypropylene random copolymer is primarily used in the manufacture of food containers due to high heat and impact resistance, flexibility, and excellent transparency. Furthermore, capacity additions in the Middle East and China are anticipated to boost the market growth. There is significant demand for food containers in Asia Pacific due to changing lifestyle and shift toward processed and packaged food However, availability of substitutes such as polyethylene, polystyrene, polycarbonate, polyethylene terephthalate, and other polyolefins is anticipated to hamper growth of the global polypropylene random copolymer market during the forecast period. The beverages industry is likely to offer large opportunities for polypropylene random copolymer manufacturers from 2015 to 2023.

Doors have been widely popular as it is one of the most commonly used structures in construction. They control the atmosphere of a place by enclosing the air drafts as well as increasing the visual appeal of the architecture. Doors can be classified based on their mechanism such as high speed doors, rotating doors and hinged doors. In addition, doors can be classified based on their functionality as safety door, trap door and blast proof doors. Raw materials such as plastic, metal and wood are used in manufacturing of doors.

Annuity Educator is pleased to announce that they have recently added American Equity to their long list of preferred partners. As a leading investment life insurance holding company, American Equity specializes in fixed index and fixed-rate annuity products.

Market Research Store has added a new research reports titled "Connected Devices in LTE" to its report store.

Complete report on the LVAD market for 2015 spread across 50 pages, profiling 3 major companies and providing 9 Tables and 30 list of charts to support the market analysis is now available at www.marketreportsonline.com/422740.html.

The Solar Light Company is a scientific organization providing in vitro and in vivo Sunscreen testing equipment for cosmetics and sunscreens, as well as UPF Testing for fabrics. They also manufacture reliable solar simulators, UV sensors, radiometers, pyranometers, light sources and other atmospheric monitoring equipment. They are pleased to announce that they will be attending the 2015 Sunscreen Symposium in Florida on September16 to 19, 2015.

This report categorizes the on the basis of World cotton supply and end use trends, regional supply and demand of cotton fibre, forecast of cotton production.

Monoethylene glycol (MEG) is a colorless, virtually odorless and somewhat viscous liquid. MEG is produced from ethylene via ethylene oxide, which in turn is hydrated by using either a thermal or catalytic production process. It is an organic compound used mainly as a raw material in the manufacture of Polyethylene Terephthalate Resins (PET), polyester fibres, etc. Mono-ethylene Glycol (MEG) can be used for applications that require chemical intermediates for resins, solvent couplers, freezing point depression, solvents, humectants and chemical intermediates. Some of the factors driving the MEG market are the growing demand of polyester fibres, which are used in textile industry and PET, which are used in packaging of goods. The report covers global, regional and country markets of monoethylene glycol. It describes present situation, historical background and future forecast of monoethylene glycol.

Textile fibers are divided into two broad categories such as (i) Natural and (ii) Man made. Natural fibers can be further subdivided into fibers of plant origin (such as cotton and linen) and fibers of animal origin (such as silk and wool). Similarly, the man-made fibers are divided into inorganic and organic fibers. Inorganic fibers are materials such as ceramic, glass and carbon (not used for fabric production). Most organic man-made fibers, on other hand, are used in fabric production and then garment & other household items production. The products from the organic fibers are mainly substitutes as complements to natural fibers. Organic fibers are further subdivided into natural and synthetic polymers.

Textile machinery is used to produce yarns, fabrics, and threads and in the finishing processes of the textile industry. There are four major types of textile machinery, namely, spinning, weaving, texturing, and knitting machinery.

Duffy's Irish Pub, a famous bar in Washington , D.C., has launched an IndieGoGo campaign to raise funds to reopen the establishment first founded by Andy Duffy.  Famous for its wings and a noted gathering place in DC, the restaurant and bar has been closed for some time.  According to the Andy Duffy, he was forced to close the bar after economic circumstances, including early debt from the opening of the pub, made it impossible for him to continue operations.  However, a unique opportunity has come about to reopen to allow him to come back. "This campaign is just about asking for a little help to get one of DC's best neighborhood bars back open again.  I am not asking for donations, I am just asking for your advance patronage.  Be a part of the rebirth of Duffy's!"

Liquid Applied Membrane (LAM) is a low viscosity waterproofing membrane which is applied as a liquid coating to horizontal and vertical surfaces. LAM is also considered as a next generation waterproofing chemical and its monolithic, seamless property, and the capability to conform to every configuration is causing its demand to escalate in the global construction industry. Usage of bad quality construction material in the past, followed by poor maintenance of the building structure is creating a strong market for repair and rehabilitation, which can be resolved by liquid applied membranes. About 40-45% of the demand for liquid applied membrane comes from repair and restoration projects. Liquid applied membranes are also efficient in reducing cracks in the concrete, thus driving its demand across the globe.

Redispersible Polymer Powder is a free-flowing organic polymer powder, produced through the spray drying of a wide range of monomers such as vinyl acetate, vinyl versatate, ethylene, acrylate, and styrene butadiene.

There are several types of alginates available in the global market including sodium, calcium, and potassium out of which sodium alginates hold the highest share of the market. Sodium alginate is a type of natural polysaccharide which is extracted from the brown seaweed that grows in cold water regions. Sodium alginate market is expanding mainly on account of the increasing size of food industry. Sodium alginate is soluble in cold and hot water, and possesses thickening and binding properties. Sodium alginate forms a gel without being heated in the presence of calcium. Sodium alginate is generally used along with calcium salts in several cuisines to produce small and large spheres filled with liquid that burst in the mouth. Sodium Alginate is also used in the food industry as an emulsifier to increase viscosity. It is also used in indigestion tablets as it does not have any discernible flavor.

Water and wastewater treatment chemicals are chemical compounds used to remove the impurities present in water and wastewater. Increasing gap between demand and supply of water in conjunction with government regulations towards the water reuse and recycle projects is driving the growth of water and wastewater treatment chemicals market. Raw or processed water is used for a wide range of applications such as cooling, washing, and processing in most of the manufacturing industries such as pulp and paper, pharmaceuticals, chemicals, metal and mining, semiconductors, power, oil and gas, and textiles. The wastewater generated from these industries is among the major contributors to the rising water pollution globally. As a result, new regulations for the maximum limit of pollutants are being passed globally, depending on the industry and type of pollutant. This in turn, is driving the demand for water and wastewater treatment chemicals market.

Acetic anhydride is manufactured by carbonylation of acetate. It is also manufactured by the reaction of ketene with acetic acid. Acetic anhydride acid is colorless and has a pungent odor. Acetic anhydride is majorly consumed in cellulose acetates. Cellulose acetate flakes include cellulose acetate propionate (CAP), cellulose di-acetate and cellulose tri-acetate. Cellulose acetate flakes are used in cigarette filters, plastics and filament yarns.

Acetone cyanohydrin is manufactured by the reaction of acetone and hydrogen cyanide in presence of water solutions such as KOH and NaOH. Tthe intermediate product however, is unstable in alkaline solution and hence is treated with sulphuric acid until its pHreaches 1-2. Acetone cyanohydrin is used as an intermediate product for manufacturing methylacrylates, methacrylamide, methacrylic acid and methacrylonitrile among others. Acetone cyanohydrin is majorly consumed in the manufacture of methylmethacrylates (MMA). Methylmethacrylates are used in the production of polymethyl methacrylate. In addition, acetone cyanohydrin finds applications in manufacturing of insecticides, flavoring agents and pharmaceuticals among others.

Paraxylene is manufactured by crystallization and adsorption processes. Paraxylene is primarily used as a basic raw material in the manufacture of terephthalic acid (TPA), purified terephthalic acid (PTA) and dimethyl-terephthalate (DMT). TPA, PTA and DMT are used to manufacture polyethylene terephthalate (PET) saturated polyester polymers. Polyesters are used to produce fibers and films.

Alkyl polyglucoside surfactants commonly referred as APG, are nonionic surfactants manufactured from renewable raw materials such as starch and vegetable oils. Alkyl polyglucoside have good foaming ability and offers fine and smooth foam. Alkyl polyglucoside surfactants have strong decontamination and good wetting characteristics. Alkyl polyglucoside has no turbidity point and is easily soluble in water and electrolytes. Alkyl polyglucosides are derived from fatty alcohols and sugars. Alkyl polyglucosides are manufactured from catalytic reaction of monofunctional alcohols and glycoses. Alkyl polyglucoside surfactants offer properties such as soil removal, foaming, filming, and anti-streaking and skin compatibility among others. Alkyl polyglucoside surfactants are used in home care products, detergents, emulsifiers and cosmetics among others.

Ammonium carbamate is a salt of carbamic acid and ammonia. The compound is white, crystalline and soluble in water. Ammonium carbamate is manufactured by reaction of ammonia with dry ice (liquid carbon dioxide). It is used as a substitute for ammonia in certain applications. Ammonium carbamate is used as an elementary material for manufacturing ammonium carbonate. Ammonium carbamate is used as decomposition controller along with metal phosphides. In addition, it is also used for detoxification of off-gases.

Bismuth is an element which resembles to arsenic and antimony. Bismuth is available in oxides and sulphide forms in ores. Bismuth has silvery white color when freshly mined but turns in light pink due to surface oxidation. Bismuth compounds such as oxides, sulfides, bismuthine, bismuthides and halides accounts for more than half the demand for bismuth. Bismuth compounds are used in various end-user industries such as chemicals, personal care, pharmaceuticals, metallurgical additives, bismuth alloys and pigments among others. Bismuth is abundantly available in nature through bismite and bismuthinite ores. Bismuth is a by-product of tungsten and lead production. Countries such as China, Peru, Mexico and Australia were the major producers of bismuth in past few years. As bismuth is less toxic than other heavy metals its used as replacement for lead and lead compounds in various applications.

Business scenario of organizations is very dynamic in today's world. Due to increasing internet connectivity with consumers and growing competition in the market, organizations are continuously trying to develop software's that enables them to understand, analyze, optimize, and manage the business requirements. Digital Marketing plays a crucial role in contemporary business world by integrating platforms and customers' experience through electronic media such as personal computers, smart phones, cell phones, tablets etc.