SBWire

Many people are aware of the humanitarian and compassionate (H and C) application process for permanent residence, which people can turn to when they are not able to access any other type of immigration application and when they can demonstrate compelling personal circumstances. However, the process is not open to all applicants, according to the Vancouver immigration Lawyers at Sas & Ing Immigration Law Centre in Vancouver, BC, Canada. For more, go to https://canadian-visa-lawyer.com/what-are-your-immigration-options-when-you-have-no-other-options/ H and C applications can be made from within Canada as well as from outside of Canada. However, the H and C statutory provisions exclude certain applicants, specifically persons found to be inadmissible to Canada pursuant to ss. 34, 35 and 37 of the Immigration and Refugee Protection Act (IRPA) on security grounds. If an applicant has been found inadmissible to Canada on one of these grounds, what are possible options to overcome such a finding and either remain in or come to Canada?

The new Hurricane Hole Superyacht Marina recently celebrated its grand opening after a significant redesign that completely renovated and expanded the premier deep-water marina of The Bahamas.

SAFE International is the leading provider of mobile self defense/personal protection training in Ontario. SAFE International has taught more than 120,000 clients in the private, corporate and high school environments since 1994. SAFE International is expanding its seminar options to include women’s self defense parties in Orillia, ON.

Manufacturing journalist, TR Cutler, recently profiled the OEE Calculator by Memex Automation for Industrial Electronics Today. In the article, Cutler interviewed to John Rattray, senior executive with Memex Automation, developers of the leading OEE (overall equipment effectiveness) Calculator. Rattray noted, Output quantifies the increase in Income From Operations (IFO or EBITDA) for Same Sales Volume and Sell Everything scenarios for various improvement criteria. The OEE ROI calculator is a very preliminary 'rough cut' analysis tool for developing a business case (to engage real-time manufacturing performance data for shop floor machines in manufacturing plants). Part of the reason Calculator is 'rough' is because a Plant average is used for several important parameters such as OEE, shift output, and quality rate.

"Where Do Recyclable Materials Go?, a children’s picture book, opens up the mysterious world of recycling to children by showing them what happens to recyclables after they are picked up at the curb.”

David McPhail, President of Memex Automation is presenting, Getting Started With MTConnect. The MTConnect Institute first ever MC2 MTConnect: Connecting Manufacturing Conference will be held on November 8-10, 2011, at the Hyatt Regency Cincinnati, Ohio. This conference is aimed at promoting the benefits and implementation of MTConnect, as well as showcasing commercially available products utilizing the standard. This session will answer the questions that those who are new to MTConnect want to know, “Where Do I Begin?” and “How Do I Connect My New and Legacy Machine Tools?“

Family owned business, Ragozzino Foods Inc., maker and distributor of Frozen foods is now live with JustFoodERP and Microsoft Dynamics NAV. Based on the decision to move to business software to address their growing business needs into the future they implemented on budget and on time

Quality departments and Six Sigma Blackbelts in nearly every industry realize the value of a good Andon System. According to John Rattray, of Memex Automation, “The term "Andon" is used to refer to a visual system designed to notify management, maintenance, or other workers of quality or process problem. In essence an effective Andon System will quickly identify the necessary location and nature of a problem.

According to a recent study in the Archives of General Psychiatry, 2.4 percent of people have been diagnosed with bipolar disorder. The researchers, who looked at data from 11 countries, admit that these numbers are probably much higher because the data refers only to those who have been officially diagnosed.

In a recent Society of Manufacturing Engineers’ press announcement, the tone was clear: “Everyone knows the issues and the situation, but little is being actively done to fix it, and this forum has a fresh and much broader representation across many parts of industry, and once the forum has formulated its common view it will be the turn of government and others that set policy to listen.....Stay tuned…”

Stuart Crawford of Ulistic becomes a member of the Treble Victor Group with aspirations of helping them to become the largest formal business network in Canada by 2015.

According to John Rattray, senior executive with Memex Automation, developers of the leading OEE (overall equipment effectiveness) Calculator, “Output quantifies the increase in Income From Operations (IFO or EBITDA) for Same Sales Volume and Sell Everything scenarios for various improvement criteria. The OEE ROI calculator is a very preliminary 'rough cut' analysis tool for developing a business case (to engage real-time manufacturing performance data for shop floor machines in manufacturing plants). Part of the reason Calculator is 'rough' is because a Plant average is used for several important parameters such as OEE, shift output, and quality rate.”

For the past three years, IndustryBuilt has been quietly supporting the efforts of FIRST (For Inspiration and Recognition of Science and Technology). Never heard of it? Well it’s about time this organization, which is very near and dear to us, gets some recognition! FIRST was founded in 1989 by Dean Kamen, famed inventor of the Segway and avid champion of science and technology. The organization’s mission is to “inspire young people to be science and technology leaders.” As members of the technology industry, we believe that encouraging the next generation to get excited about science and innovation is crucial to our industry’s future.

Developed as a guide for shop owners and plant managers exploring the MTConnect implementation process, the MTConnect Institute announced the release of the "Getting Started with MTConnect - Connectivity Guide."

For many consumers, shopping for a car can be overwhelming. Kanetix.ca - a quote comparison service for a variety of insurance and financial-related products - understands that with so much to think about, many people forget to consider the cost of car insurance when purchasing a new vehicle.

According to John Rattray, of Memex Automation, “The term "Andon" is used to refer to a visual system designed to notify management, maintenance, or other workers of a quality or process problem. In essence an effective Andon System will quickly identify to the necessary stakeholders the location and nature of the problem. Leading companies around the world have successfully implemented Andon Systems as part of their Lean Manufacturing philosophies. Quality departments and Six Sigma Blackbelts in nearly every industry realize the value of a good Andon System.

Take Back Manufacturing (TBM) was a theme at the recent CMTS event in Toronto. The Society of Manufacturing Engineers (SME) presented a roadmap to take Back Manufacturing. It was shared that North America is rapidly losing prosperity via the decline in this important part of the economy. During the event it was advocated that much more must be done to improve the business environment, improve the focus and approach to better position success within the manufacturing sectors.

Zevrix Solutions announces LinkOptimizer 4.6.3, an update to its popular workflow automation solution for Adobe InDesign. Awarded 4 out of 5 starts by Computer Arts magazine, LinkOptimizer allows to reduce InDesign job size and speed up processing by eliminating excess image data, performing essential image adjustments such as color conversion and sharpening, and converting file formats automatically. The new version improves handling of non-proportionally scaled images in InDesign documents.

Liquid Nutrition Group Inc. (“Liquid Nutrition” or “Company”) today confirms that the franchise locations available in British Columbia (B.C.) have sold out! The opening of the first location in the province is slated later this year, with a roll-out of nineteen other stand-alone stores to follow in succession. Two local British Columbians, Two-time NBA MVP Steve Nash and Toronto-based Bay Street trader Mark Attanasio have partnered to bring this exciting brand to the West Coast.

AxOEE is a Manufacturing Productivity Tool for Real-Time Monitoring enabling and Increased Productivity. According to John Rattray, of Memex Automation, “One of the important products we will feature this year is AxOEE. AxOEE allows information output to large (“Marquee”) displays. There is real?time, color?coded information about machine and Job status, Job Parts to Go, Job Hours to Go, Reason for stoppage, Operator help call, and more data which, can be transmitted to a Marquee via Ethernet, anywhere in the plant.” These benefits can be viewed at CMTS at Booth 1135 today.

As a Cisco Partner, Reis Information Systems focuses in on providing the best services pertaining to the Small- to Medium-sized Business (SMB) market. With the achievement of the Cisco SMB Specialization, Select Certification demonstrates their technology and business expertise specific to the SMB market.

With the uncertain state of the economy, businesses are looking for new ways to earn extra money with little or no investment. Some are choosing to cut back on company overhead, while others are lessoning their advertising exposure.

Developed as a guide for shop owners and plant managers exploring the MTConnect implementation process, the MTConnect Institute announced the release of the "Getting Started with MTConnect - Connectivity Guide."

After nearly 40 years in business, Toronto’s Crawford Custom Jewellers has seen thousands of engagement rings Toronto couples make their choices for engagement and wedding rings. While there is no right or wrong way, one thing is clear —men will forever be faced with the prospect of the wrong ring choice verses a spoiled surprise from getting their fiancé’s input. The family-owned jeweller has over 4,000 custom-designed jewellery items including engagement rings, wedding bands, diamond rings, pendants, bracelets, earrings and coloured stones.

Apply the Theory of Constraints principle by monitoring and identifying a constraint. Improve operator productivity and satisfaction by helping them perform faster and reduce their data collection overhead using automatic and accurate tracking systems. OEE - Overall Equipment Effectiveness is the key performance indicator that drives this machine monitoring process.

More than 600 manufacturers and distributors will feature cutting-edge technologies and ideas that speed new product development time, cut costs, and deliver world-class quality from Monday, October 17 — Thursday, October 20 at the Canadian Manufacturing Technology Show (CMTS). This is Canada's ultimate manufacturing event at the Toronto's Direct Energy Centre. Live demonstrations of the latest machine tools, automation technologies and production methods give manufacturers the chance to break through the everyday clutter of information to make informed purchase decisions. Beyond the show floor, attendees will experience a timely and relevant keynote, interactive town hall panels, and numerous opportunities to expand attendees network and fine-tune technical knowledge.

Immigrants failing the Canadian citizenship test keep on increasing after Canada revamped the rules and toughened its questions. This has made it harder for immigrants to get a Canadian citizenship.